781746
84
Zoom out
Zoom in
Previous page
1/87
Next page
Original-Bedienungsanleitung FUXTEC Laubbläser FX-LB133T_de_en_fr_ita_rev08
84
72. Risoluzione dei problemi
Situazione
Causa
Soluzione
Il motore non si avvia
1. Serbatoio Vuoto
2. Motore ingolfato
3. Candela sporca (residui di carbonio sugli
elettrodi), distanza troppo ampia tra gli
elettrodi
4. Carburatore/ugelli sporchi
5. Connettore/candela d’accensione
danneggiata
6. Nessuna scintilla di accensione
1. Rifornimento carburante
2. Rilasciare la leva del gas, avviare p
volte se necessario. Smontare la
candela di accensione, pulirla e
asciugarla
3. Pulire la candela di accensione e
controllarne il grado termico.
Se necessario, sostituire la candela.
Regolare la distanza tra gli elettrodi:
0.6-0.7 mm
4. Pulire il carburatore con aria
compressa
5. Sostituire
6.Controllare il connettore, il cavo
candela e il modulo d’accensione,
eventualmente sostituire. Regolare la
distanza tra gli elettrodi (0.6-0.7 mm).
Il motore gira troppo veloce al
minimo
1. Motore freddo
1. Far riscaldare lentamente il motore e
chiudere leggermente lo starter, se del
caso.
Il motore non garantisce la
massima performance
1. Candela sporca (residui di carbonio sugli
elettrodi), distanza troppo ampia tra gli
elettrodi
2. Carburatore/ugelli sporchi
3. Filtro aria sporco
4. Marmitta, valvola di scarico del cilindro
5. Anello tenuta carter non ermetico
6. Anelli cilindro e pistoni usurati
7. Miscela di carburante errata (troppo olio)
8. Accensione difficoltosa
1. Pulire la candela di accensione e
controllarne il grado termico.
Se necessario, sostituire la candela.
Regolare la distanza tra gli elettrodi:
0.6- 0.7 mm
2. Pulire il carburatore
3. Pulizia
4. Smontare e pulire il tubo di scarico,
rimuovendo i residui di carbonio
5. Sostituire
6.Sostituire il cilindro, il pistone o gli
anelli, levigare il cilindro e reinserire
all’interno il pistone
7. Seguire le istruzioni per il rifornimento
8. Regolare la distanza tra gli elettrodi
(0.6-0.7 mm)
Il motore non si arresta
1. Candela di colore grigio chiaro con segni
di bruciatura
2. Depositi di carbonio nella camera di
combustione
1. Installare una candela con grado
termico maggiore
2. Pulire la testata e le scanalature del
cilindro oltre alla testa del pistone
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-LB133T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-LB133T in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info