Manual Fuxtec FX-KSP250 (page 31 of 99) (English, German, French, Italian)

781774

Zoom out

Zoom in

1/99

Original manual for petrol chainsaw FX-KSP series

− Have damaged parts replaced or re-

paired, ensuring that the correct specifi-

cation of spare parts is observed when

doing so.

◼ Before commencing work, familiarise

yourself in detail with how to operate

the chainsaw.

Noise and vibration

NOTE

Values for noise levels and total vibrations can

be gleaned from the "Technical data" table.

CAUTION!

The indicated measurements refer to new

power tools. Daily use causes the noise and

vibration values to change.

NOTE

The vibration level specified in these instruc-

tions was measured in accordance with a

standard test procedure that meets the re-

quirements of EN 60745.

If the chainsaw is not maintained properly, the

vibration level could be affected during opera-

tion. This may significantly increase the vibra-

tion load over the total working period.

To estimate the vibration load more accu-

rately, the times should also be taken account

of during which the equipment is switched off.

This may significantly decrease the vibration

load over the total working period.

CAUTION!

Wear ear defenders at a sound pressure

above 85 dB(A).

Information about noise develop-

ment

CAUTION!

The actual vibration emissions value during

operation of the machine may deviate from

that specified in the operating instructions or

by the manufacturer. This could be influ-

enced by the following factors, which should

be taken account of before and during use:

− Is the chainsaw being used correctly?

− Is the procedure during processing and

cutting of the wood correct and appro-

priate?

− Is the machine in a good state of repair, is

the sharpness of the cutting tool OK and

is the correct cutting tool being used?

− Are the handles or, if necessary, op-

tional vibration damping handles fitted

and are these firmly attached to the ma-

chine body?

NOTE

There may be national regulations (environ-

mental, occupational safety) that restrict use

of the chainsaw.

This is loud equipment and the noise cannot

be avoided. For longer periods of operation,

make sure that it is used during authorised

and dedicated times. Respect quiet periods

where required and do not make more noise

than necessary. Ensure, for personal safety,

that hearing protection is worn by the opera-

tor and persons in the vicinity.

◼ All of the aforementioned precautions are

not enough to prevent vibration white fin-

ger or carpal tunnel syndrome.

◼ Keep an eye on the condition of your

hands and fingers if you are a frequent or

regular user.

◼ If you experience any unpleasant feeling in

your hands or skin discolouration during

use of the machine, stop work immedi-

ately. Seek medical assistance without de-

lay in the event of one of the above symp-

toms.

◼ Take a sufficient number of breaks from

work. Failure to take sufficient breaks from

work can cause hand-arm vibration syn-

drome.

◼ Depending on the workload, therefore, es-

timate the degree of exposure from chain-

saw use. Reduce the risk of being ex-

posed to vibrations in doing so.

◼ Make a work plan. The vibration load can

be reduced in this way.

◼ Minimise use of the chain saw at tempera-

tures below 10°C.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KSP250 Manual

Product: