Manual Fuxtec FX-KS226 (page 65 of 146) (English, German, French, Italian)

781772

Zoom out

Zoom in

1/146

Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01

4. further reviews

Check the device for fuel leaks, loose fasteners

and damage to key components, in particular

handles and chain stay attachment. If a defect

is found, it must be repaired before the next

start-up.

If the device falls unintentionally onto the

ground, it must be checked for damage as

above and, if necessary, repaired before the

next use.

PERIODIC MAINTENANCE POINTS

1. cylinder cooling fins

Dust trapped between the cylinder fins can

cause the engine to overheat. The cylinder fins

must therefore be cleaned regularly after

removing the air filter and cylinder cover. When

fitting the cylinder cover, make sure that the

switch wires and grommets are properly

seated.

2. fuel filter

(a) Use a bent wire to remove the filter from

the filling opening.

(1) Fuel filter

(b) Dismantle the filter and wash it out with

petrol or replace the filter if necessary

3. spark plug

Clean the electrodes with a wire brush

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KS226 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KS226 Manual

Product: