Manual Fuxtec FX-GP1800 (page 20 of 46) (English, German, French, Italian)

781766

Zoom out

Zoom in

1/46

Original user manual FUXTEC FX-GP1200/FX-GP1600/FX-GP1800_rev02

- Open filling screw (8).

- Fill with water via the filling screw up to the mark on the pump housing

- Screw in the filling screws again.

Switching on

1. Open all shut-off devices (valve, spray nozzle, water cock) in the pressure line.

2. Insert the plug of the mains cable into the power socket.

3. Switch on the pump at the on / off switch.

Important:

Danger of damage to the pump! A closed pressure line can result in damage to the

pump. Do not allow the pump to run against a closed pressure line.

Switching off

Switch the pump off at the on / off switch after use. Close all the shut-off devices in the

pressure line.

Important:

Danger of injury from hot water. After extended use against the closed pressure side

(> 10 min.), the water in the pump can become very hot and may escape

uncontrolled! Disconnect the pump from the mains supply and allow the pump and

water to cool down. Put the pump into operation again only after all the faults have

been remedied!

The risk of injury from hot water can arise in the event of:

- Incorrect installation,

- Closed pressure side,

- Lack of water in the suction line, or

- Defective pressure switch

Procedure in case of overheating

1. Disconnect the pump from the mains supply and allow the pump and water to cool

down

2. Check the pump, installation and water level.

3. Put the pump into operation again only after all the faults have been remedied!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-GP1800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-GP1800 Manual

Product: