Manual Fuxtec FX-GP1600 (page 19 of 46) (English, German, French, Italian)

781765

Zoom out

Zoom in

1/46

Original user manual FUXTEC FX-GP1200/FX-GP1600/FX-GP1800_rev02

Connect the suction line

Note:

We recommend the installation of flexible lines at the pump inlet to prevent mechanical

pressure or tension being exerted on the pump.

1. Select the length of the suction line such that the pump cannot run dry. The suction

line must always be at least 30 cm under the water surface.

2. Connect the suction line. Ensure that the connection is tight, but take care not to

damage the thread.

3. If the water carries a small amount of sand, aprefilter must be installed between

suction line and pump inlet.

4. Always lay the suction line with an upward gradient.

Note:

If the suction head is more than 4 m, a suction hose with a diameter larger than 1” must

be installed.

Install pressure line

1. Screw connecting nipple (13) with round seal ring (14) into pump outlet (2).

2. Screw elbow nipple (11) with seal (12) onto connecting nipple (13) and turn the

elbow nipple in the required direction.

3. Connect pressure line (10) to elbow nipple (11).

4. Open all shut-off devices (valves, spray nozzles, water tap) in the pressure line.

Operation

Important:

Danger of damage to the device. Dry running will destroy the pump!

The pump must be filled with water up to the overflow before each use so that it can

draw water immediately.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-GP1600 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-GP1600 Manual

Product: