Manual Fuxtec FX-EB162 (page 45 of 103) (English, German, French, Italian)

781747

Zoom out

Zoom in

1/103

Originalbetriebsanleitung FUXTEC FX-EB152/FX-EB162_de_en_fr_ita_rev16

Note

Only when the device is warm enough does the drill start. Let the engine run

warm enough. Avoid full-throttle shocks during the warm-up phase and let

the device warm up slowly.

NOTE: If the engine does not start after repeated attempts, refer to Troubleshooting.

NOTE: Always pull the starter rope straight out. Pulling the starter at an angle causes

the rope to rub against the eyelet. The diagonal pull can lead to fraying or breaking of

the starter cable. Always hold the starter handle firmly when the rope retracts. Never

allow the rope to be thrown back from the extended position. This could damage the

starter device.

10. Warm start of the device

1. Place the device on a firm and flat surface.

2. Move the engine stop switch to the start position "1".

3. Slide the choke to the "WARM START" position.

4. Pull out the starter rope with a short-stroke until resistance is felt

(about 100mm). A continuous, high-speed train will provide a strong spark and start

the engine.

If the emgine does not start, please proceed again according to "Cold starting the

device."

11. Stopping the device

Unlock the gas handle. Let the engine return to idle. Push the engine stop switch on the

handle upwards until the device stops. If this does not stop, pull the spark plug

connector in an emergency. Never leave the device unattended while it is running.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-EB162 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-EB162 Manual

Product: