781747
38
Zoom out
Zoom in
Previous page
1/103
Next page
Originalbetriebsanleitung FUXTEC FX-EB152/FX-EB162_de_en_fr_ita_rev16
38
4. Instructions for accessories
Make sure that your product is only equipped with original accessories. Only use
original parts that are specified by the manufacturer. The use of any other
attachments or accessories may cause injury to the user and damage to the
device.
Clean the device thoroughly, especially the fuel tank and air filter. All fuel must be
removed after using the device.
If you approach a user of the device as a spectator, carefully attract his attention
and confirm that the user will stop the device. Please do not startle or distract the
user. Otherwise, you could cause an unsafe situation.
Never touch the drill when the device is running. If it is necessary to replace the
guard or drilling tool, be sure that the device and drilling tool has stopped.
The device must be OFF before you change the working range of the device.
If necessary, have the device repaired by an authorized dealer. If the device is
defective, do not let it continue to run.
When starting or operating the device, never touch hot parts such as the
exhaust, ignition cables, or spark plug.
After the engine has stopped, the exhaust is still hot. Never place the device near
inflammable materials (dry grass, flammable gases or flammable liquids, etc.)
Pay particular attention to the fact that the ground can be slippery when
operating in the rain or immediately after the rain.
If you slide or fall to the ground, release the throttle immediately.
Take care not to drop the device or hit it against obstacles.
Before adjusting or repairing the device, make sure that the device is stopped,
and the spark plug connector is disconnected.
If the device is to be stored for an extended period, drain fuel from the fuel tank
and carburetor, clean the parts, place the device in a safe place and ensure that
the device has cooled down completely.
Perform constant checks to ensure the safe and efficient operation of the device.
For a complete inspection, please contact a specialist workshop.
Keep the device away from fire or sparks.
Be careful when using it. There are dangers from kickback and recoil.
5. Notes on working with drilling tools
The device can be operated with different diameters of drills. Diameters from 60mm to
300mm can be used for this device. The use of drills other than those approved by the
manufacturer with this device is prohibited.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-EB162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-EB162 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info