781788
18
Zoom out
Zoom in
Previous page
1/44
Next page
4
Electrical Safety
- The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do
not use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets
reduce the risk of electric shock.
- Avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
- - Halten Sie Elektrowerkzeuge von Regen oder Feuchtigkeit fern. The penetration of water
into a power tool increases the risk of electric shock.
- - Verwenden Sie das Kabel nicht zum Tragen oder Aufhängen des Elektrowerkzeugs oder zum
Ziehen des Steckers aus der Steckdose. Keep the cable away from heat, oil, sharp edges or
moving parts. Damaged or tangled cables increase the risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable suitable for outdoor use reduces the risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable suitable for outdoor use reduces the risk of electric shock.
Safety of Persons
- Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while utilizing the power tool can cause serious injury.
- Wear personal protective equipment and always protective goggles. Wearing personal protective
equipment, such as a dust mask, non-slip safety shoes, safety helmet, or hearing protection,
depending on the type and use of the power tool reduces the risk of injury.
- Avoid unintentional commissioning. Make sure that the power tool is switched off before
connecting it to the power supply and/or battery, picking it up or carrying it. If you have your
finger on the switch when carrying the power tool or if you connect the device to the power
supply while it is switched on, this can lead to accidents.
- Remove adjustment tools or wrenches before turning on the power tool. A tool or key that is in a
rotating part of the device can cause injury.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1SS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1SS20 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info