781784

Fuxtec FX-E1SBS20 Manual

30
Zoom out
Zoom in
Previous page
1/51
Next page
Original User Manual FUXTEC 20V cordless hammer drill FX-E1SBS20 +
FUXTEC 20V cordless screwdriver FX-E1BS20
14
Operation
Speed selection
The speed selector is located on the top of the motor housing. Allow the tool to come to a complete
stop before changing speeds.
To correct the speeds under different conditions:
1. for low speed, push the speed selector in the direction of the number 1.
2. for high speed, press the speed selector in the direction of the number 2.
Setting the rotation direction
The control switch (Figure 1, item 7) can be set to three positions:
Forward, reverse and lock.
To rotate forward (clockwise), push the control switch in from the right. Check the direction of the
drill before use. For reverse rotation (counter clockwise), press the control switch from the left side
of the tool. Check the running direction of the drill before use.
To lock the on/off switch, press the control switch to the middle position. The on/off switch will not
work while the control switch is in the centre position. Use the lock before performing maintenance,
changing accessories, or storing the device.
Start, stop and speed control
To start the tool, firmly grasp the handle and press the on/off switch (Figure 1, item 1)
NOTE: The work light is switched on when the on/off switch is pressed.
To vary the speed, increase or decrease the pressure. The further the switch is pressed in, the greater
the speed.
To stop the tool, release the switch. Make sure that
the device has come to a complete stop before putting down the tool.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1SBS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1SBS20 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info