781804
20
Zoom out
Zoom in
Previous page
1/48
Next page
Original User Manual FUXTEC 20V Cordless Hedge Trimmer FX-E1HS20
4
- Keep power tools away from rain or wet conditions. Water entering a power tool increases the risk
of electric shock.
- Do not use the cord to carry or hang the power tool or to unplug the power tool from the wall
outlet. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
- If you use a power tool outdoors, only use extension cords that are suitable for outdoor use. Using
an outdoor power tool suitable extension cable reduces the risk of electric shock.
Personal safety
- Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication.
A moment of carelessness while using a power tool can cause serious injury.
- Wear personal protective equipment and always wear safety glasses. Wearing personal protective
equipment such as a dust mask, non-slip safety shoes, hard hat or ear protection, ever after type and
use of the power tool, reduces the risk of injury.
- Avoid unintentional start-up. Make sure that the power tool is switched off before connecting it to
the power supply and/or battery, picking it up or carrying it. If you lift your finger while carrying the
power tool on the switch or connect the device to the power supply when switched on, this can lead
to accidents.
- Remove adjustment tools or wrenches before turning on the power tool. A tool or wrench that is in
a rotating part of the unit may cause injury.
- Avoid abnormal posture. Maintain a safe standing position and balance at all times. This will help
you control the power tool in unexpected situations.
- Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by moving parts.
Use and handling of the power tool
- Do not overload the device. Be sure to use the designated power tool for your work. With the right
power tool, you will work better and safer in the specified power range.
- Do not use a power tool whose switch is defective. A power tool that cannot be switched on or off
is dangerous and must be repaired.
- Unplug the power cord and/or remove the battery before making adjustments to the device,
changing accessories or putting the device away. This precaution prevents the power tool from
starting accidentally.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1HS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1HS20 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info