Manual Fuxtec FX-E1HLP20 (page 21 of 34) (English, German, French, Italian)

781794

Zoom out

Zoom in

1/34

Original User Manual FUXTEC 20V cordless heat gun FX-E1HLP20

Use

The tool is switched on and off at the two-stage switch on the front of the handle. Please keep the

switch pressed to activate the heating stage (2). As soon as you no longer hold down this setting, the

switch changes directly to position 1 (= cold air). The distance to the object you are working on

depends on the material and the intended working method. Always test the air flow and

temperature on a test piece first.

With the attachable accessory nozzles, the hot air flow can be controlled with highest precision. A

small amount of smoke may be produced the first time the unit is used. Switch off the unit with the

switch position "0".

Be careful when changing the hot air nozzles! When you set up the hot-air generator, make sure that

it is standing on a stable, non-slip and clean surface and let it cool down completely before changing

the nozzles!

Additional nozzles:

- Air reduction nozzle (a): Reinforced, punctual heat for corners, plexiglass bending and soldering.

- Hook nozzle (b): ambient heat for welding thin pipes, soft-soldering of copper tubes, tube forming

and shrinking of heat shrinkable tubing.

- Fan nozzle (c): Aligns heat over a wide area. Can be used for the removal of paint, floor coverings

and vinyl surfaces or for drying.

Important:

When using the additional attachments, it is absolutely necessary that they are firmly attached. If this

is not done, the heated air can be returned to the unit and the unit can be damaged. Therefore,

please make sure that the attachments are fitted correctly (see following pictures).

The work lamp lights up when the tool is switched on. In addition to illuminating the area to be

machined, it also serves as a "tool ON" indicator light.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1HLP20 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-E1HLP20 Manual

Product: