Original-Bedienungsanleitung FUXTEC Drucksprüher 20l_rev03
11
• Never blow out nozzles and other small parts with the mouth.
• Wash hands and face thoroughly after finishing work.
• Keep plant protective agent device and protective agents away from children.
• Do not spray on humans or animals.
• Not intended for spraying of solvents, acidic or corrosive chemical agents and petroleum
products.
• Protect device from heat sources and frost.
• Use of the device on windy days is forbidden.
• Admissible liquidity temperatures 1°C – 30°C.
Troubleshooting
The pump is pressurized but does not emit any liquid:
a) Check whether the filter and the nozzle of the spray lance are clean and clean if necessary.
No pressure is building up on the pump:
b) Activate the pump lever several times while the spray lance is closed and then open the pray
lance.
c) When a little fluid is in the container, activate the pump lever until a certain resistance is felt.
d) Check whether all closures are tightly screwed.
e) Check whether the seals are intact. Replace if need be.
Technical Data