781737

Fuxtec FX-4MS142 Manual

47
Zoom out
Zoom in
Previous page
1/113
Next page
Original Bedienungsanleitung FX-4MS142_de_en_fr_ita_rev01
47
from the pulled-out position. This could damage the starter device.
23. Warm start of the machine
1. Place the device on a firm and flat surface.
2. Move the engine stop switch down
3. Slide the choke to the "WARM START" position
4. Pull out the starter rope with a short-stroke until resistance is felt
(about 100mm). A continuous high-speed train will provide a strong spark and start the engine
If the machine does not start, please proceed again according to "Cold start of the machine
STOP MACHINE
Unlock the throttle lever. Let the machine return to idle. Push the engine stop switch until the
machine stops.
ADDITIONAL SAFETY INSTRUCTIONS
Before running your machine, repeat GENERAL SAFETY INSTRUCTIONS in this manual.
CAUTION
IF YOU are NOT familiar with the trimming techniques, practice with the MACHINE in the "OFF"
position.
ALWAYS TRIM OR CUT AT HIGH ENGINE SPEEDS. Do not run the machine slowly at the
beginning or when trimming.
ALWAYS MAKE DISTANCE IN WORKING AREAS from cans, bottles, rocks, etc. Striking objects
can cause serious injury to users or bystanders and can also damage the machine. If an object is
accidentally struck, immediately stop the MACHINE and check the device. Never run the machine
with damaged or defective parts.
DO NOT use the machine for any purpose other than trimming grass.
NEVER lift nylon cutting head above knee height when operating.
Do not run the machine on a slope if there is a chance of slipping or losing stability.
RELEASE OF THE NYLON CUTTING HEAD
To release fresh thread, leave the machine at full power and "push" on
Run nylon cutting head against the lawn. The thread releases automatically. The
blade in the
protective shield cuts off excess thread.
CAUTION: Remove grass deposits regularly to prevent overheating of the drive
axle. Grass build-up occurs when weed fibers become entangled around the shaft
under the protective shield. This condition prevents the shaft from cooling correctly.
Remove grass deposits with a screwdriver or similar tool only when the machine is
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-4MS142 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-4MS142 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info