Manual Fuxtec FX-4MS142 (page 37 of 113) (English, German, French, Italian)

781737

Zoom out

Zoom in

1/113

Original Bedienungsanleitung FX-4MS142_de_en_fr_ita_rev01

METERS.

⚫ Keep hands and feet free of the nylon cutting head or metal blade during the

operation.

⚫ Do not use the machine if you are tired, sick, or under the influence of medication,

drugs, or alcohol.

⚫ Use an undamaged nylon cutting head. If you hit a stone or any other obstacle, stop

the machine and check the nylon cutting head. Never use a defective or unbalanced

nylon cutting head.

⚫ Before starting, after failure or impact, be sure to check the device and make sure it is

in good condition.

⚫ Attention! Local regulations may limit the use of the machine.

⚫ Always keep the device with the cutting tool in good condition.

⚫ Note, improper maintenance, use of non-compliant spare parts, or removal or

modification of safety devices can cause damage to the device, and severe injury to

the person working with it.

⚫ Secure the device properly during transportation to prevent loss of fuel, damage to the

device, and injury.

⚫ For machines with a clutch, regularly check that the cutting attachment stops rotating

when the engine is idling.

⚫ Before each use, check the machine for loose fasteners, fuel leaks, damaged parts,

etc. Replace damaged parts before use.

⚫ It is necessary to take sufficient breaks and change the working position regularly.

19. Instructions for accessories

⚫ Do not store the machine in an enclosed area where fuel vapors can reach an open

fire from water heaters, stoves, etc. Store the device in a well-ventilated area only.

⚫ Make sure that your product is only equipped with original accessories. These parts

are available from your dealer. The use of any other accessories or attachments may

cause injury to the user and damage to the machine.

⚫ Clean the machine thoroughly, mostly the fuel tank and air filter. All fuel must be

removed after using the

device.

⚫ IMPORTANT: When filling fuel, make sure that the machine is off and cooled down.

Never refuel when the device is running or hot. If gasoline is spilled, wipe it up before

starting the machine.

⚫ Keep at least 15m distance to other persons during the work.

⚫ If you, as a spectator, approach a user of the machine, carefully attract his attention

and confirm that the user stops the machine. Please do not startle or distract the user.

Otherwise, you could cause an unsafe situation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-4MS142 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-4MS142 Manual

Product: