566460
19
Zoom out
Zoom in
Previous page
1/94
Next page
19
Transmitter Battery voltage
In addition to the model type, the LCD screen also displays the transmitter battery
voltage. When the voltage goes below the Battery Low Voltage alarm setting, the
          
transmitter is turned off. When the low battery alarm sounds, immediately land your
model before losing control.
NOTE: If the transmitter ever reaches this battery voltage alarm, land as soon as safely as possible. A
          
transmitter battery is slightly above the low voltage alarm setting.
Mixer Alert Warning (Heli Only)
If the transmitter is turned on with the throttle hold or idle up function switched on,
    
throttle hold and/or idle up functions off to proceed.
Backup error
The Backup error warning occurs when the transmitter memory is lost for any reason. If this occurs, all of
the data will be reset when the power is turned on again.
  when this message is displayed: all programming has been erased and is not available. Return
your transmitter to Futaba service.
PROGRAMMING THE T6J-2.4GHZ RADIO
Anytime you wish to view or change any of the current settings in the transmitter, the programming mode

for approximately one second. Once in the program, the MODE or END key will be used to scroll through
each of the available functions/features. The MODE key will scroll one direction while the END key will
scroll in the opposite direction. Therefore, if when scrolling through the functions, if the modeler bypasses
the desired function, press the opposite key to scroll back to the bypassed function. For example, if using the
MODE key to scroll and the desired function is passed, press the END key to scroll to the desired function.
The functions available for each model type are as follows:
Model type ACRO: Parameters- Data Reset / Model Type Select /Mode Select/Throttle Cut/Battery Fail
Safe/Model Name, Model Select, Reversing, Dual Rates, Exponentials, End Point Adjustments, Trim, Sub-
Trim, Programmable Mix 1, Programmable Mix 2, Flaperon Mixing, Flap Trim, V-Tail Mixing, Elevon
Mixing, Throttle Curve, Pitch Curve, Failsafe, Trainer and Timer.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info