520093
114
Zoom out
Zoom in
Previous page
1/127
Next page
114
<Functions of Model Menu (Helicopter Functions)>
Throttle Hold
This function sets the throttle cut position at
auto rotation dive. The throttle position can also
bet to an idling position separate from the throttle
cut position. Setting of these 2 positions can be
selected by switch. This allows use by switching
during training.
Example of use
Since Throttle Hold has 2 modes of (Cut)
and (Idle), using it in the idling mode
during training and in the cut mode when
stopping the engine at meets, etc. is
convenient.
Note: When throttle hold is set to ON at the normal
condition, throttle hold acts and the throttle servo is
deactivated. Always set throttle hold to ON at the
hold condition.
● Return to Model Menu
Touch the [Throttle Hold] button in the Model
Menu to call the setup screen shown below.
Set to the engine stop position.
●Select the SW to be used.
●Set to the idling position.
●Set to the idling position.
Setting method
● Operation mode selection
Manual mode: The throttle hold function is
operated by switch operation only.
Auto mode: The throttle hold function operation is
linked to the throttle stick position.
Auto position setting: When the Auto mode was
selected, the throttle position (auto position) can
be selected. Move the throttle stick to the position
you want to set and touch the (auto position)
button.
● Hold position adjustment
Throttle Hold (Cut) sets the throttle cut position.
Adjust it so that the carburetor is full open.
Throttle Hold (Idle): Make this adjustment to
maintain idling for training. Adjustments can be
made based on the throttle curve idle position.
● The throttle servo operating speed can be
adjusted. (Speed)
● Throttle cut or training function can be switched
by hold function selector switch.
Operation precautions
WARNING
When starting the engine, confirm that
the idle up condition and throttle hold
condition are [OFF].
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info