520093

Futaba T14-MZ Manual

104
Zoom out
Zoom in
Previous page
1/127
Next page
104
<Functions of Model Menu (Airplane/Glider Functions)>
●Return to Model Menu
RUD to ELE
[Corresponding model type]: Airplane, general
This function is used when you want to mix
elevator operation with rudder operation. It is used
to correct undesirable tendencies when rudder was
applied in roll maneuvers, knife edge, etc. of stunt
planes.
● A mixing curve can be set.
● Mixing during flight can be turned ON/OFF by
setting a switch. (Always ON at NULL setting)
● The amount of correction rudder can be
memorized by using the Memory function. This is
● Touch the [RUD to ELE] button in the Model Menu to
call the setup screen shown below.
● Mixing curve setting
(For a description of the curve setting method, see
the description at the back of this manual.)
● Fine tuning VR setting
● When [INH] is touched, the memory
items are displayed.
convenient at mixing curve setting. When memory
operation (switch operation) is performed with
correction rudder applied in the Memory Mode,
the stick position at that time is displayed on the
mixing curve. The point is automatically refl
ected
in the curve. (When the Memory function is used,
"Line" is automatically selected as the curve type.)
● Link can be set: Links this mixing to other mixings.
● The mixing rate can be fi
ne-tuned by setting a VR.
(Fine tuning)
● Overall
● Overall
adjustment
by Rate A
and Rate B
● Group/single mode switching (Gr./Sngl)
(For more information, see the description at the back of
this manual.)
Setting method
● Touch the "INH" button, and set the function to
ACT(ON).
● When setting a switch, touch the "NULL" button
to call the <Switch> screen, and then select the
switch and set its ON direction. (Always ON at
"NULL" setting)
(For a description of the switch setting method,
see the description at the back of this manual.)
● When setting a VR, touch the Fine Tuning "NULL"
button to call the <Switch> screen, and then
select the VR. The fi
ne tuning rate and adjustment
direction can be set.
The VR operation mode can also be set.
(For a description of the fine tuning VR setting
method, see the description at the back of this
manual.)
● The curve display mode can be changed.
Single : Displays the mixing curve only
Fine Tuning : Displays the fine tuning rate of the
fine tuning VR
All Cond. : Displays the mixing curve of all the
conditions (When conditions are set)
● When setting Link, touch the Link button and set it
to ON.
Memory function usage method
(Example) Using the memory function with an F3A
airplane (knife edge correction)
*
When call switch
[SW-A] and memory switch
[SW-H] were set
[Memory function operation]
1. Memory function mode: [Manual]
[Memory]
2. When the memory switch (SW-H) is set to ON
while performing elevator correction when
rudder was applied at knife edge, the point
position at that time is memorized. Memorization
is performed while changing the left and right
stick positions.
3
. To recall the memorized positions, set [SW-A] to ON.
The memorized correction rate is reflected on the
curve, and operation is simultaneously set.
Note: When memorized from manual before flight, be sure that
the memory SW is not accidentally set to ON and incorrect
mixing setting is not applied when taxiing, starting the engine,
etc.
● Mixing curve setting
● Fine tuning VR setting
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info