520093
95
Zoom out
Zoom in
Previous page
1/127
Next page
95
<Functions of Model Menu (Airplane/Glider Functions)>
Trim Mix 1/2
[Corresponding model type]: Glider, 2 ailerons or more
These functions call the ailerons, elevators, and
flaps (camber flaps, brake flaps) trim offset rates
preset according to the flight state.
● The offset of the aileron, elevator, and flap servos
can be adjusted.
● These functions can be called during fl
ight by
setting a switch. Trim Mix 2 has priority.
● The ailerons, elevators, and fl
aps operation speed
can be adjusted. (IN side/OUT side)
● A delay can be set for each condition. A cut
switch which can turn OFF the delay function can
also be set.
● The trim rate can be fi
ne-tuned by setting a VR.
● Trim mixing call can be linked by stick, etc.
by setting the Auto mode. A stick switch, etc.
separate from the function ON/OFF switch can be
set.
●Return to Model Menu
When a fine tuning VR was set at the next page (2/2), the
ailerons and flaps trim rates can be adjusted.
Touch the corresponding button and adjust the rate with the
adjustment buttons displayed on the screen.
The ailerons, flaps, and elevators
offset rate can be adjusted.
Touch the corresponding button
and adjust the rate with the
adjustment buttons displayed on
the screen.
Touch the [Trim Mix 1] button in the Model Menu to
call the setup screen shown below.
(The display screen is an example. The actual screen depends on the
model type. The screen shown below is for 4 ailerons and 4 flaps.)
(Touch the [1/2] button to switch to page 2.)
Touch the ACT button and set the function to ACT
(ON).
When setting a switch, touch the Switch button
to call the <Switch> screen, and then select the
switch and set its ON direction. (Always ON at "NULL"
setting)
(For a description of the switch selection method, see the description at
the back of this manual.)
Example
1. Touch the ACT button and set the trim mix function
to [ON].
*When separating the settings for each condition, touch the
group mode button and set it to [Sngl].
2
. Select the ON/OFF switch.
3. Select the [Manual] or [Auto] mode.
In the [Auto] mode, also select an auto SW. This
switch can be linked to a stick, etc.
<Speed>
In: The operation speed at switch ON can be set.
Out: The return speed at switch OFF can be set.
<Fine Tuning>
The offset rate can be varied in the Fine Tuning
numeric range set at screen [1/2] by VR, etc.
selection.
<Condition Delay>
When flight conditions are set, the operation speed
can be set for each condition. Condition delay
operation can be interrupted and each rudder
quickly returned to its original position by selecting a
cut switch.
*When separating the settings for each condition, touch the
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info