520093
77
Zoom out
Zoom in
Previous page
1/127
Next page
77
<Functions of Model Menu (Common Functions)>
● Return to Model Menu
Touch the [Prog. Mixes] button in the Model Menu to
call the setup screen shown below.
Prog. Mixes
Program mixing which can be freely customized. Up to 10 mixings can be used for
each condition. [All model types]
Up to 10 of these program mixings can be use
for each condition. This function can be used
in various applications, as well as in fuselage
correction.
Link function: This function can be link with
other mixing. Linking can be individually set
for master channel and slave channel. The
link polarity can also be reversed.
Trim mode: The trim mode can be turned
ON/OFF.
The slave channel AFR mode (STK→ STK) can
be used. AFR function (D/R function) setting
can be added at slave channel link function
setting. This is effective in correction when
the fuselage is the same but the rudder
● Fine tuning trim can be set.
Servo speed can be set (including setting of
the operation start point)
Mixing curve adjustment: Six types of curves
(linear, EXP1, EXP2, VTR, line and spline) can
be selected. A maximum 17 points curve can
be used for line and spline type curves. (Initial
setting: 9 points) The number of points can
be increased and decreased, and curves
from complex curves to simple curves can
also be used.
Offset mode: This mode does not use the
master channel. Up to four slave channels
can be simultaneously offset. A fine tuning
VR and servo speed (including setting of the
operation start point) can be set.
Mixing buttons
Mixing buttons
After this function was activated, the
master and slave function names (or
offset mixing) are displayed.
●Mixing mode change button
●Group/single mode switching (Gr./Sngl)
●Group/single mode switching (Gr./Sngl)
(For more information, see the description at the back of this manual.)
●Operation curve setting
(For a description of the curve setting method, see the description
at the back of this manual.)
●Servo speed setting
(For a description of the setting method, see the description at the back of this manual.)
●Switch selection
(For a description of the switch setting method, see the description at the back of this manual.)
●Fine tuning trim setting
(For a description of the setting method, see the description
at the back of this manual.)
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info