747980
37
Zoom out
Zoom in
Previous page
1/189
Next page
37
Basic Operation
+RZWRWXUQ212))WKH
SRZHURIWKHWUDQVPLWWHU
Windows
®
Embedded Compact 7 is installed as a
built-in operating system in the T32MZ transmitter.
Compared to the conventional system, the T32MZ
takes extra time for internal processing when it is
turned on/off.
When turning on the power of the transmitter
1. Place the throttle stick below 1/3 closed.
2. Turn on the power switch.
*After initialization of the transmitter is complete,
the LED monitor turns Purple.
*If your throttle stick is not at 1/3 closed or fully
closed, a warning will sound. If you move the
throttle to 1/3 closed or fully closed, the warning
will stop and will become a "Transmit ?" screen.
*If you push the button "NO", then the transmitter
will not emit radio waves.
*If you push the button "Yes", then the transmitter
will emit radio waves.
*If a battery is removed and it re-connects, please
switch on a power supply, after 3 seconds or more
pass.
Start-up time;
The time required to initialize the internal circuit
of the transmitter varies between the previous time
you turned the power off and then restarted the
transmitter. There are two “start up” modes for your
transmitter, see below:
Cold start;
If you turn on the transmitter more than four hours
after you last turned it off, the mode is “Cold start”.
³&ROGVWDUW´LVQRUPDOIRUWKH¿UVWLQLWLDOSRZHUXS
of the day. It will take about 30 seconds to be ready
for use, as it takes time to initialize the internal
circuit of the transmitter.
Hot start;
If you turn on the transmitter less than four hours
after you last turned it off, the mode is “Hot start”.
Since initialization has been partly completed, the
transmitter will be ready to use in several seconds.
Since initialization has been partly completed, the
transmitter will be ready to use in several seconds.
³+RWVWDUW´WDNHVSODFHXVXDOO\DWDVHFRQGÀLJKWRU
ODWHUÀLJKWLQWKHGD\
WARNING
Once you turn on the power, never shut off the
power switch until the power becomes stable (or
XQWLOWKH¿UVWVFUHHQVKRZVXS,I\RXWXUQRII
the power switch while the transmitter is going
through the initialization process, the data could
be damaged.
Note:
The start-up time may be a little bit
slower when the microSD card is installed
compared to when the card is not.
How to stop the transmitter
Turn off the power switch of the transmitter. The
internal circuit of the transmitter starts the shut
down process including saving the set-up data.
Once you turn off the power, never operate the
power switch until the power shutdown process
is fully completed. If you turn on the power
switch again while the transmitter is still in the
process of power shutdown, the data could be
damaged.
7KHFHQWHUVZLWFK
LVSXVKHG
3XVKDQGKROG
WKHFHQWHU
VZLWFK
%$6,&23(5$7,21
How to reset software
If the screen freezes for some reason and you
cannot edit, the transmitter power supply is not
fully off even if you turn OFF the power switch.
You will need to remove the battery and reinsert
it again. In this case, the power restarts in “Cold
mode”. Even though the screen freezes, all the
other functions for radio control operation remain
operative.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-32MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-32MZ in the language / languages: English as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T-32MZ

Futaba T-32MZ User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info