747915
58
Zoom out
Zoom in
Previous page
1/175
Next page
58
Common function
Function
PARAMETER submenu: sets those parameters
you would likely set once, and then not disturb
again.
Once you have selected the correct model you
wish to work with, the next step is setting up the
SURSHUSDUDPHWHUVIRUWKLVVSHFL¿FPRGHO
Data reset (RESET)
The present model data is reset. Data Reset does NOT reset, ATL Trim, TELEMETRY mode, or STK POSI
Alarm.
Model type(TYPE) SWASH : Only helicopter WING : Only glider
MODEL TYPE: sets the type of programming used for this model.
The T10J has 30 model memories, which can each support:
One powered aircraft (ACRO) memory type (with multiple wing and tail configurations. See twin
aileron servos, twin elevator servos, ELEVON, and V-TAIL for further information.)
Eight helicopter swashplate types, including CCPM. See Helicopter MODEL TYPE for details.
● If you use CGY750, the swash type should choose H-1. ( Swash type is chosen by setup in CGY750. )
Five glider wing types. See glider WING TYPE for details.
Multicopter type.
Before doing anything else to set up your aircraft, first you must decide which MODEL TYPE best fits
this particular aircraft. (Each model memory may be set to a different model type.) If your transmitter
is a T10JA, the default is ACRO. If it is a T10JH, the default is HELI(H1).
ATL Trim(ATL)
Adjustable travel limit (ATL): makes the channel 3 TRIM LEVER (THROTTLE TRIM) effective only at
low throttle, disabling the trim at high throttle. This prevents pushrod jamming due to idling trim
changes. This function defaults to ON. If you are not using channel 3 for throttle, you may want
trim operation the same as on all other channels. To do so, set ATL to OFF. If you need the ATL to be
effective at the top of the stick instead of the bottom, reverse the THR-REV setting. Note that this
affects all models in the radio, not just the model you are currently editing.
LCD contrast(CONTRAST)
Contrast adjustment LCD screen.
● You adjust to legible contrast. set up range -10 ∼ +10
Back light(BACK-LIT)
Back light mode of a LCD screen can be chosen.
● ALWAYS / KEY-ON (Shines for a definite period of time after key operation.) / OFF
Light time(LIT-TIME)
Sets the length of time the backlight will stay on.
● Set up range 1 ∼ 30
Light adjustment(LIT-ADJS)
Light volume adjustment of a back light.
● Set up range 1 ∼ 30
Home display (HOME-DSP)
Item selection displayed on a home screen
Futaba logo (Default), USR-NAME , RX BATT, DT5/DT6, THR/PIT (Case of helicopter, the position of a
throttle and pitch.)
PARAMETER
Parameter function
(Common)
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-10J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-10J in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T-10J

Futaba T-10J User Manual - German - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info