30054
14
Zoom out
Zoom in
Previous page
1/18
Next page
12
INSTALLATION AND ADJUSTMENT
ADJUSTMENTS
The operating direction, neutral position, and steering angle of each servo are
adjusted.
CAUTION
The basic linkage and adjustments of the fuselage conform to the fuse-
lage design drawings and kit instruction manual. Be sure that the center
of gravity is at the prescribed position.
ADJUSTMENT PROCEDURE
Before making any ad-
justments, set the chan-
nel 1 and 2 Servo Re-
versing switches and
MIX switch on the front of the transmit-
ter to the lower (NOR/OFF) position.
However, when using the V-tail or
Elevon mixing, set the MIX switch to
the upper (ON) position.
Turn on the transmitter and receiver
power switches and make the following
adjustments:
1 Check the direction of operation
of each servo.
If a servo operates in the wrong direction,
switch its Servo Reversing switch. (The
direction of operation can be changed
without changing the linkage.)
*Note that the direction of the aileron, V-
ail, or Elevon servo is easily mistaken.
(Page 9)
2 Check the rudder/aileron and el-
evator neutral adjustment and
left-right (up-down) throw.
Check that when trimmed to the center,
the servo horn is perpendicular to the
servo and check the neutral position of
the fuselage control surfaces (rudder/ai-
leron, elevator, etc.). If the neutral posi-
tion has changed, reset it by adjusting
the length of the rod with the linkage rod
adjuster.
When the throw is unsuitable (different
from steering angle specified by the kit
instruction manual), adjust it by changing
the servo horn and each control surface
horn rod .
3 If necessary,
•Adjust the speed control in accor-
dance with its instruction manual.
•Check the flap or spoiler linkage.
4 After all the linkages have been
connected, recheck the operating
direction, throw, etc.
*Before flight, adjust the aircraft in accor-
dance with the kit instruction manuals.
5 Fly the plane and trim each servo.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba SKYSPORT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba SKYSPORT in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info