747922
161
Zoom out
Zoom in
Previous page
1/183
Next page
161
Model Menu (Helicopter Functions)
Throttle hold
This function sets the throttle cut position for
autorotation. The throttle position can also be set to
an idling position. Setting of these 2 positions can
be selected by switch. This allows use for switching
during training.
Example of use
ŏ Since throttle hold has 2 modes (Cut) and
(Idle), using it in the Idling mode during
training and in the Cut mode when
stopping the engine at contest, etc. is
convenient.
Note: When throttle hold is set to ON in the normal
condition, throttle hold acts and the throttle servo
is deactivated. Always set throttle hold to ON in the
hold condition.
Setting method
ŏ Operation mode selection
Manual mode(Manual): The throttle hold
function is operated by switch operation
only.
Auto mode(Auto): The throttle hold function
operation is linked to the throttle stick
position.
Auto position setting: When the auto mode is
selected, the throttle position (auto position)
can be selected. Move the throttle stick to
the position you want to set and tap the
screen. (Auto position is displayed.)
ŏ Hold position adjustment
Throttle Hold (Cut) sets the throttle cut
position. Adjust it so that the carburetor is fully
closed.
Throttle Hold (Idle): Make this adjustment to
maintain idling for training. Adjustments can
be made based on the throttle curve idle
position.
ŏ The throttle servo operating speed can be
adjusted. (Speed)
ŏ Throttle cut or training function can be
switched by hold function selector switch.
Operation precautions
WARNING
When starting the engine, confirm that
the idle up condition and throttle hold
condition are OFF.
ŏ Select [Throttle hold] at the model
menu and call the setup screen shown
below.
Current position
Hold position
Engine cut setting Engine idle setting
Set to the engine
stop position.
Set to the idling
position.
ŏReturn to Model menu
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info