747922
154
Zoom out
Zoom in
Previous page
1/183
Next page
154
Model Menu (Helicopter Functions)
This section contains information on the
commands that apply to helicopters only. For
instructions on airplane, glider and multicopter,
refer to the sections pertaining to those aircraft.
Use the Model type function in the Linkage
menu to select the swash type matched to the
fuselage beforehand.
Also, add flight conditions at the Condition
Select screen if necessary before setting the model
data at each function. (Up to 8 conditions can be
used)
The AFR function, dual rate function and other
functions common to all model types, are described
in a separate section.
Pitch curve: Pitch curve and hovering trim adjustment
Throttle curve: Throttle curve and hovering trim adjustment
Acceleration: Allows a brief "overload" in response to sudden throttle and pitch commands
Throttle hold: Moves the throttle to idle during autorotation
Swash mixing: Compensates for each control response
Throttle mixing: Compensates for power loss when cyclic applied
PitchĺNeedle: Adjusts response curve in different Àight conditions
PitchĺRudder: Handles torque changes from pitch angle inputs
Gyro: Used to switch gyro sensitivity
Governor: Used to switch RPM of the helicopters head
(Model menu screen example)
*The Model menu screen
depends on the model type.
Tap this icon to
go to the model
menu.
ŏ Select the function
name and return to
the Home screen.
ŰƒƇƈƏŃƐƈƑƘŃŋūƈƏƌƆƒƓƗƈƕŌŃƉƘƑƆƗƌƒƑƖŃƗƄƅƏƈ
Condition hold
When performing adjustments, such as idling up, when
the engine is engaged, keep the throttle stable so as to prevent
the engine from revving too high. Once your adjustments are
complete, always make sure to set the function to [OFF].
*Condition hold ON/OFF operation is possible under normal
conditions and the throttle stick is more than 1/3rd into the slow
throttle range. Throttle servos will remain at the throttle stick
position during ON operation.
ON/OFF operation on the Home screen
Under the conditions described above, tap the Condition hold
[OFF] displayed on the screen.
During function operation, Condition hold will display [ON]
and an alarm will sound.
WARNING
For safety reasons, when performing individual
adjustments it is recommended that you shut off
the engine and disconnect the motor to prevent
rotation.
*Sudden, abrupt rotation can result in death or serious injury.
MODEL MENU
(
Helicopter
functions)
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info