747922
151
Zoom out
Zoom in
Previous page
1/183
Next page
151
Model menu (Airplane/Glider/Multicopter Functions)
Motor
[Corresponding model type]: Airplane/glider, general
This function lets you set the operation speed
when the motor of an F5B or other EP glider is
started by switch. The operation speed can be set
in 2 ranges of slow speed flight and high speed
Àight (Speed 1/Speed 2). This function can also be
operated as a safety function by setting 2 switches.
ŏ The in side and out side operating speeds can be
adjusted independently in 2 ranges (Speed 1/
Speed 2).
ŏ The boundary between the 2 ranges can be set.
(From speed 1 to speed 2)
ŏ The set operation speed operation can be
activated at initial operation only. (1 time
operation) However, operation can be repeated
by setting the switch to OFF before operation is
Ànished. When you want to reset 1 time operation,
set the ACT/INH item to [INH] and then reset it to
[ON].
ŏ The motor (CH3) is controlled by SW-G. (Initial
setting) When changing the switch or stick which
controls the motor, first change Function of the
Linkage menu.
Note: When using this function, always check initial
operation with the propeller removed.
ŏ When using this function, Tap [INH].
ŏ When you want to set the "One time mode",
tap to the [One time] item and tap the
screen.
ŏ Speed 1 to 2
The speed 1 and speed 2 region boundary
can be changed,
ŏ Operation speed adjustment
The speed when speed 1 and speed 2 are
ON (In) and OFF (Out) can be adjusted.
ŏ When using this function, Tap [INH].
ŏ Group/single mode switching
(For more information, see the description
at the back of this manual.)
ŏ Switch
A switch that turns the function itself
ON/OFF can be selected.
ŏ Motor off position
Tap the motor off button when [SW-G] is in
the motor OFF position you want to set. The
direction of the motor switch is memorized.
The screen graph display OFF direction also
changes.
Notes
ŏ First decide the motor OFF direction, and then
set the speed. When you want to reset the
motor OFF direction, also reset the speed.
ŏ We recommend that motor OFF be set in
combination with F/S.
ŏ Set the basic operation direction with the reverse
function to match the ESC used.
ŏ Always set the motor OFF position.
ŏ Select [Motor] at the model menu and
call the setup screen shown below.
ŏReturn to Model menu
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info