747922
127
Zoom out
Zoom in
Previous page
1/183
Next page
127
Model menu (Airplane/Glider/Multicopter Functions)
The dedicated mixes, etc. usable when airplane
or glider model type is selected are displayed
in this Model menu functions section. First use
the Model type function of the Linkage menu to
preset the model type, wing type, and tail type
matched to the fuselage used. Other settings reset
the data used in mixing function, etc.
These dedicated mixes can be set for each
flight condition, as required. When you want to
use the system by switching the settings for each
condition by switch or stick position, use the
Condition select function to add Àight conditions.
(Up to 8 conditions can be used)
Note: The FX-36 is designed so that the airplane and
glider model types can handle aircraft of the same
wing type.
The functions common to airplanes and gliders,
except some dedicated functions, are summarized
without regard to the model type.
The setting items are different, depending on the
number of servos, etc. according to the wing type
used. The setup screens in the instruction manual
are typical examples.
Aileron differential
This function adjusts the left and right ailerons.
Roll axis correction and ¿ne tuning with a VR are also
possible. This is convenient when making settings
during Àight.
[Airplane/glider, 2 ailerons or more]
Flap setting
The flaps can be adjusted independently. For a 4
flaps model, the camber flaps can be mixed with the
brake Àaps. [Airplane/glider, 2 Àaps or more]
AIL
Camber Àap
This mix operates the camber flaps in the aileron
mode. It improves the operation characteristic of the
roll axis. [Airplane/glider, 2 ailerons + 2 Àaps or more]
AILĺ Brake Àap
This mix operates the brake flaps in the aileron
mode. It improves the operation characteristic of the
roll axis. [Airplane/glider, 4 Àaps or more]
Aileronĺ Rudder
This mix is used when you want to operate the
rudder at aileron operation. Banking at a shallow bank
angle is possible. [Airplane/glider, general]
ElevatorĺCamber
This mix is used when you want to the mix camber
flaps with elevator operation. Lifting force can be
increased at elevators up. [Airplane/glider, 2 ailerons or
more]
(Model menu screen example)
*The Model menu screen
depends on the model type.
Tap this icon to
go to the model
menu.
ŏ Select the function
name and return to
the Home screen.
ŰƒƇƈƏŃƐƈƑƘŃŋŤƌƕƓƏƄƑƈŒŪƏƌƇƈƕŒŰƘƏƗƌƆƒƓƗƈƕŌŃƉƘƑƆƗƌƒƑƖŃƗƄƅƏƈ
MODEL MENU
(Airplane/Glider/Multicopter functions)
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info