747922
59
Zoom out
Zoom in
Previous page
1/183
Next page
59
System menu
Battery
Low battery alarm voltage set
*When the low battery voltage setting is changed, it is changed for
every model in the transmitter. A unique voltage cannot be set for
each model. A change in the low battery voltage setting also does
not reset other data.
Select the battery alarm voltage according to the
battery to be used.
Battery type change :
LiFe(2cells) NiMH(5cells)
Manual setting
It isn't indicated in case
of manual setting.
Vibrator Types
Type 1
Type 2
Type 3
Auto power off time setting
This function prevents battery
discharging if the transmitter power
supply does not erase.
1. Adjust the auto power off time with
the value input buttons.
*When the time the transmitter is inactive reaches
the set time, the power is turned off automatically.
This time can be set up to 1 hour in 10 minutes
increments. The auto power off function can also
be deactivated.
*An audible alarm is sounded from 3 minutes
before auto power off. When a stick or switch is
operated, the alarm is cleared.
Refer to P.43
Range Check
Before a Áight ground range check.
The 'range check mode' reduces the transmission
range of the radio waves to allow for a ground
range check.
*The range check mode, when activated, will continue for
90 seconds unless the user exits this mode early. When the
progress bar reaches 90 second mark, the RF transmission
automatically
returns to the normal operating power.
WARNING
Do not fly in the range check
mode.
*Since the range of the radio waves is
short, if the model is too far from the
transmitter, control will be lost and the
model will crash.
ŏReturn to System menu
When choosing manual
setting, the numerical
value can be input.
It's dangerous to
set it manually in
the low voltage.
Attention:
When using the 5-cell NiMH battery, the alarm setting is 5NiMH. If you
use a 2SLiFe battery, change the setting for the undervoltage warning to 2LiFe, if you
use a 2SLiPo battery, change the setting to manual setting 7,0V.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info