747921
72
Zoom out
Zoom in
Previous page
1/174
Next page
72
<Functions of Linkage Menu>
Telemetry function (FASSTest mode only)
To use the telemetry function, set “Telemetry”
to “ACT”.
DL Interval (FASSTest mode only)
When a telemetry function is enabled, the
receiving interval (down-link interval) of sensor
data can be changed.
If a DL interval is increased, the response of
the sensor data display becomes slower, but stick
response will improve.
System Type selection procedure
1. Move the cursor to the [FASSTest-14CH]
item and touch the RTN button to switch to
the data input mode.
2. Select the system type by scrolling the
touch sensor.
[FASSTest-14CH][FASSTest-12CH][FASST-
MULT][FASST-7CH][S-FHSS]
*An example of selections for each system is on the
following page.
3. Touch the RTN button to end adjustment
and return to the cursor mode.
Dual receiver function (only FASSTest 14CH
mode) procedure
1. Move the cursor to the [SINGLE] item and
touch the RTN button to switch to the data
input mode.
2. Select the [SINGLE] or [DUAL] by scrolling
the touch sensor.
3. Touch the RTN button to end adjustment and
return to the cursor mode.
Area mode selection (Frequency range)
procedure
1. Move the cursor to the [G] item and touch
the RTN button to switch to the data input
mode.
2. Select the [G]or[F] by scrolling the touch
sensor.
*"F" is chosen only when using the transmitter is used in
France. Leave this in "G" otherwise.
3. Touch the RTN button to end adjustment and
return to the cursor mode.
Telemetry ACT/INH procedure
1. Move the cursor to the TELEMETRY [ACT] item
and touch the RTN button to switch to the
data input mode.
2. Select the [ACT]or[INH] by scrolling the touch
sensor.
3. Touch the RTN button to end adjustment and
return to the cursor mode.
DL Interval set procedure
1. Move the cursor to the TELEMETRY DL[1.0s]
item and touch the RTN button to switch to
the data input mode.
2. Select the DL time by scrolling the touch
sensor. If a DL interval is increased, the
response of the sensor data display becomes
slower, but stick response will improve.
Initial value: 1.0s
Adjustment range : 0.1s~2.0s
3. Touch the RTN button to end adjustment and
return to the cursor mode.
ID of a Primary
receiver displays.
ID of a Secondary
receiver displays.
In DUAL, a primary receiver is link previously.
Next, a secondary receiver is link.
72


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-fx22

Reset search

  • How to set up throttle curve on Futaba FX22 radio control transmitter Submitted on 2-1-2025 at 23:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX22 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info