Manual Futaba FX22 (page 58 of 174) (English)

747921

Zoom out

Zoom in

1/174

Assigning models to the sensor buttons:

There are four sensors/buttons that correspond

with the SensorTouch: Link (LNK), Model (MDL)

System (SYS) and S1. As such, it is possible to offer

up to four models available through the Quick Select

IXQFWLRQ:HVXJJHVWXVLQJWKHPRGHOVWKDW\RXÀ\

most often.

1. Use the SensorTouch, scroll to the desired

sensor/button for the Àrst model; for example,

Link (LNK).

2. With the input next to the desired sensor

highlighted, press the Return (RTN) button one

time.

3. Using the SensorTouch, scroll through the

available models. To select the desired

model, press the Return (RTN) button.

4. Repeat as desired for the remaining sensors.

Using the sensors to select the model:

1. Turn ON the transmitter, activating the

4uick Select screen. If Model (MDL) has

been selected, please be sure to press the

Model (MDL) sensor when powering up the

transmitter.

* Please note: Even if the Quick Select function is active, the

Power Mode screen will appear when the transmitter is turned

ON while simultaneously pressing the Return (RTN) button.

2. To select the model assigned to a particular

sensor, double-click the desired sensor. For

example, MODEL- 03 is assigned to S1, double-

click S1 to bring forth all settings, etc. for Model

-03. The FX-22 offers an audible and visual

conÀrmation as the selected model memory is

changed accordingly.

* If the Return (RTN) button is double-clicked, the FX-22 the

current model is selected as indicated on the display. That is,

the model that was used prior to the last time the transmitter

was turned OFF.

Model Select Screen

This allows the Model Select screen to be accessed

immediately upon turning ON the transmitter.

* Please note: this function cannot be utilized at the same time

as the Quick Select function. If more than four models are

ÀRZQUHJXODUO\ZHVXJJHVWWKDWWKH0RGHO6HOHFWIXQFWLRQEH

utilized as it will save time when selecting the desired aircraft.

,IIRXURUIHZHUPRGHOVDUHÀRZQWKH4XLFN6HOHFWRSWLRQ

would be the best choice.

* Please note: the Model Select function does not allow access

to the RENAME, COPY or DELETE options. To utilize one

of these options, please access the Model Select screen in

the typical manner as described in the complete instruction

manual.

1.The Start Selection (START SEL.) menu is

accessed through the FX-22·s System Menu.

Turn the transmitter ON and then press the

SYS (System) button two times. Use the

SensorTouch to highlight the Start Selection

(START SEL.) and then press the Return (RTN)

button to conÀrm the selection.

2. The Start Selection (START SEL.) menu option

defaults to OFF meaning that 4uick Select

and Model Select are not applicable. To

activate the 4uick Select or Model Select, use

the SensorTouch to scroll to the OFF setting as

denoted in the image. With the OFF indication

highlighted, press the Return (RTN) button and

rotate the SensorTouch once again to scroll

to the Model Select (MODEL SEL.). Press the

Return (RTN) button once again to activate

Model Select as indicated.

Model Select Activation:

With the Model Select (MODEL SEL.) option

activated, there are two additional options available

for customization; ALWAYS and MDL (Model).

These options determine if/when the Model Select

information will appear on-screen. ALWAYS,

as the name suggests, indicates that each time

the transmitter is powered-up, the Model Select

information will appear on-screen. The MDL

(Model) setting indicates that the Model Select

information will appear on-screen only when

the MDL button is pressed simultaneously as the

transmitter is turned ON.

With the Model Select mode highlighted, use the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX22 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba FX22 Manual

Product: