30036
22
Zoom out
Zoom in
Previous page
1/26
Next page
OTHER FUNCTIONS
USING THE ACCESSORIES
• Trainer function (Trainer cable optional)
2 Operating at the instructor side
Operation is possible by turning on the
instructor transmitter power switch. At
this time, turn off the trainer switch.
1 Connection to transmitter
Trainer switch
Student transmitter
Instructor transmitter
Trainer cable (6-conductor)
3 Operating at the student side
Operation is possible at the student
transmitter while the trainer switch at
the instructor side is held in the ON
state.
*Operation is impossible if the instructor transmitter modulation
mode and student transmitter modulation mode is different.
Set
to the same mode before using. Setting method
Always turn off the student transmitter power switch. Do not
operate the trainer switch either.
*Use the functions of the other two transmitters with the same
setting.
SPLINED HORNS
This horn permits shifting of the
servo neutral position at the servo
horn. Setting and shifting the
neutral position.
a) Angle divisions
1) The splined horn has 25 seg-
ments. The amount of change per
segment is; 360/25=14.4°.
2) The minimum adjustable angle
is determined by the number of
arms or number of the holes. For
four arms, the minimum adjust-
able angle is:
b) Effect
To shift the holes center line to
the right (clockwise) relative to
baseline A, shift arm 2 to the po-
sition of arm 1 and set it to the
position closest to baseline A.
[Example] For a four arm horn,
the angular shift per segment is
14.4°. The shift to the right is 90°
-
(14.4
x
6)
=
3.6°.
To shift by the same angle in the
opposite direction, use the oppo-
site arm number.
For a six arm horn, turn the arm
counterclockwise and set arm 2
to the position of arm 1. The ad-
justable angle is 6- (14.4 x 4)
=2.4°.
Arm 3 shift 4.8° to the right, arm
6 shifts 2.4° to the left, and arm 4
shifts 7.2° to the right and left.
The following splined horns are optional.
20—
HORN A
(FSH6X)
HORN B
(FSH
6)
HORN C
(FSH
6A)
HORN D
(FSH
6W)
HORN E
HORN F
HORN G
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP7UAF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP7UAF in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info