Manual Futaba 9ZHP_part2 (page 51 of 78) (English)

29053

Zoom out

Zoom in

1/78

Sailplane Section

AILERON-SPEED FLAP COUPLING (ASF)

This function may be used to control mixing

from the ailerons to the speed flaps, making the

entire wing act as ailerons. When the aileron stick

is moved, the aileron and speed flap servos operate

simultaneously, which improves the model's roll

rate.

Setting Up Speed Flap Coupling

Activation of command

In the Condition Menu, press the

ASF

key to get the

AIL TO SPF menu, as shown below. Use the

A ( D )

key

to activate mode setting, then press the

ACT

or INH

keys ( F and G ) to activate or inhibit speed flap coupl-

ing.

The left and right deflection angles of the speed

flap servos can be adjusted. Speed Flap mixing can

be made to turn on and off during flight by setting

a switch. Initially, an ON/OFF switch is not de-

fined, so mixing remains on all the time.

Mode setting

Flap 1 Left Travel

Rate Setting

Flap 1 Right Travel

Rate Setting

Screen

To On/Off Switch

Setting Menu

Mode Selection Keys

Return To

Condition Menu

Flap 2 Left Travel

Rate Setting

Flap 2 Right Travel

Rate Setting

To Next Screen

Flap 1 Left Travel Setting

First set the amount of mixing throw for Flap 1. Press

the C key to activate travel setting for the Left direction

and set the throw with the numeric keys E to M . The

number keys 0 through

100

input the value directly.

The + and - keys increase or decrease the value by 1.

The +/- key may be used to reverse the throw direc-

tion.

If you are not sure what you are changing, hold the

stick to one side and press different keys — if there is no

effect, move the aileron stick to the other side and con-

tinue. Your setting may vary from -100 to +100%, the

initial value is +50%.

Now set the travel for the Right throw on Flap 1.

Press the D key to activate travel setting, and set the

throw with the numeric keys as before.

Flap 2 Left Travel Setting

You now set the amount of mixing throw for Flap 2.

Press the

NXT Q

key to get to the flap 2 menu, then

press the C key to activate travel setting for the Left

direction and set the throw with the numeric keys E to

M as you did for Flap 1.

Now set the travel for the Right throw on Flap 2.

Press the D key to activate travel setting, and set the

throw with the numeric keys as before.

On/Off Switch Setting

On initial setting, an activation switch for speed flap

mixing is not set, meaning that once activated, it is on all

the time. If you would like to set a switch to turn it on

and off, call the Switch Setting screen by pressing the

SWT P key. Then use the keys to choose the desired

switch location and on direction. For more information

on the switch setting method, see page 37).

Sailplane Section, Page 127

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9ZHP_part2 Manual

Product: