29011
74
Zoom out
Zoom in
Previous page
1/78
Next page
Common Condition Section
Screen 2
Trim Mode
Setting
Delay-Rate
Setting
Value of
Subtrim
Stepping
Rate
Repetition
Speed
Stepping
Rate
Repetition
Speed
Return To
Condition Menu
First
Step
Second
Step
Mode Selection Keys
Trim Mode Selection
To select the trim mode, first press the A key. You
may select
the
normal
mode by pressing the NOR E
Key,
or
select
the
ATL
mode
by
pressing the ALT F
key.
Combined/Separate Mode Selection
Select the Combination mode (trim controls all flight
conditions) by pressing the
CMB H
key, or select the
Separate mode (trim only controls current flight condi-
tion) by pressing the
SEP
I key.
Delay setting
To set the delay for trim changing, press the
B
key
and set the delay with the rate setting keys F to M . The
initial delay value is 0%, but the setting may vary from 0
to
100%.
Trim Notification Beeper
Press the C key to activate the beeper control, then
turn on the beeper by pressing the
ON F
key. You
may turn off the beeper by pressing the
OFF G
key.
First Step Rate and Repetition Speed
To set the first step parameters, press the
R
key. Now
you may set the step rate with the rate setting keys E to
M.
The initial value is 3. but your value
may vary from
1 to 50 or left unchanged by using INH.
Now set the repetition speed by pressing the
Q
key.
The repetition speed may now be set with the rate setting
keys F to M . This is initially set to 60%, but may vary
from 0 to 100%.
Second Step Rate and Repetition Speed
The second step rate is reached when further pressure
is held on the trim switches. To set the second step para-
meters, press the P key. Now you may set the step rate
with the rate setting keys
E to M
The initial value is 8.
but your value may vary from 1 to 50 or left unchanged
by using INH.
Now set the repetition speed by pressing the
O
key.
The repetition speed may now be set with the rate setting
keys F to [M . This is initially set to 80%, but may vary
from 0 to 100%.
Returning
Press the
END N
key to return to Screen 1. Press
the
N
key again; the display returns to the condition
menu.
Common Conditions Section, Page 72
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info