29011

Futaba 9ZHP_part1 Manual

43
Zoom out
Zoom in
Previous page
1/78
Next page
Model Setting Section
TIM—TIMERS & ELAPSED TIME COUNTER
The Timer function may be set for any desired
time, i.e. engine run time, specified times for com-
petitions, etc. Two independent timers are provid-
ed for your use. The timers are stored indepen-
dently with each model, meaning that when you
switch between model setups, the timer associated
with the new model is brought up automatically.
The timers may be set to start and stop from
the soft keys, or from the motion of any switch or
stick. You may set the ON and OFF directions
freely. Each timer has a capacity of up to 59
minutes 59 seconds. You may set the timer from
either the Home Display or the Model Menu, using
the
TIM
key.
Each timer may be set for countdown or count-
up operation with a target time. If a target time is
set and the timer reaches the set time, a buzzer
sound for each count is generated. Countdown
timers sound two short beeps during the last ten
seconds before reaching the target, then a long
tone at the target time, and continue counting
while displaying a minus (-) sign. Count up timers
also beep the last ten seconds, beep the target
time, and keep counting upwards until shut down.
Setting Up Timers
To select the timer you wish to set, use the
SEL
(
R
) button. This key toggles between the two timers,
Next, choose either an up or down timer using the UP
and
DWN
(
L
and
M)
keys.
Set your desired target time by pressing the
SET
(
G
) key. This calls up the timer-setting keys on the
screen bottom. You may input the desired number of
minutes by pressing any of the number keys, then adjust-
ing with the + (F) and - (G) keys. To adjust the
seconds value, press the minute/second M/S (
E
) key
once. To get back to the minute setting, press M/S
again.
The timer you have just set will now work on the
start/stop (S/S) keys (B and D). If you'd like to
have a switch or stick position turn them on and off, press
the
SWT
key (P) now. Then use either the switch
setting or stick setting menu to set the desired switch or
stick (for more info, see page 37).
You may choose whether Timer 2 is displayed on the
home screen. To display it, press the
DSP
(
J
) key.
The Timer 2 display is turned on and off alternately as
this key is pressed.
When you are satisfied with all the timer setups, press
the
END (N)
key to return to the home menu.
Timer Operations
To start and stop Timers 1 and 2, press the S/S keys
(A
and D respectively). Each time the Start/Stop key is
pressed, the timer stops (if running) or starts (if stopped).
To reset the two timers, press the
RST
keys (
B
and
C).
Model Setting Section, Page 41
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info