29011
37
Zoom out
Zoom in
Previous page
1/78
Next page
FRQ—TRANSMITTER FREQUENCY SETTING
(9ZAPS/HPS ONLY)
System Section
The exclusive Frequency Synthesizer System
Module (FP-TK-FSS) allows you to switch your
transmission frequency in software! No longer do
you have to carry around a module and receiver
for each frequency, or a carton of crystals! You
may choose from any of the frequencies in the 72
MHz band, channel numbers 11 through 60
(72.010 to 72.990 MHz).
When you activate the FRQ function, the dis-
play shows the frequency list with channels 11
through 20 displayed. To display the next ten
channels, press the
NXT (R)
key; to show the
previous ten channels, press the
PRE (Q)
key.
To select the transmit frequency, first locate
the desired frequency using the procedure above.
Then, select the desired channel number with the
channel selection keys A to J. It the selected
channel is the correct one, verify by pressing the
Set (O) key.
It is necessary to cycle the transmitter's power
to
broadcast on the selected frequency. When you
do
this, the channel number and frequency are
dis-
played on
the Home Screen.
READ THE
WARN-
ING BELOW BEFORE TURNING ON.
WARNINGI
Be sure that you know the frequency your trans-
mitter is set to broadcast on BEFORE you turn it
on. If you are unsure what the frequency is, hold
either the A or R keys and turn on the transmitter.
The transmit frequency will be displayed on the
Home Screen. Then, turn off the transmitter and
turn it on again when you have the proper frequency
control in your possession.
To View Next
10 Channels
To View Previous
10 Channels
Press if Incorrect
Channel Chosen
Use to Confirm
Channel Setting
Return to
System Menu
Use To Select Desired Channel No.
Displays the Selected Frequency
& Channel Number
System Section, Page 35
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info