29011
10
Zoom out
Zoom in
Previous page
1/78
Next page
Manual Introductory Section
If you are using the Synthesized transmitter module FP-TK-FSS,
be sure that you know the transmitting frequency before switching
on. If you don't know the frequency, hold the [A] or [R] key down
as you switch on power. The transmitting frequency will be displayed
but radio transmission is deactivated. Once you have determined the
frequency,
secure
the appropriate frequency
control
device
and
turn
on power to operate normally.
Be sure to charge the transmitter and receiver batteries fully. If the
system has not been used for a long time, be sure to charge at least
24 hours before using the system, and check both batteries with the
system voltmeter at high load (500 mA). The transmitter battery
should remain above 9.4 volts, and the receiver should be above 4.7
volts. IF EITHER BATTERY INDICATES LOWER THAN THIS, DO
NOT FLY. Recharge the batteries first.
Do not quick charge the battery. Overcharging the battery will
cause the battery to overheat and creates a very dangerous situation.
Recharge
Do not expose your system to rain or allow water to get inside the
case. If water does penetrate the case, control of the model could be
lost, resulting in a crash and danger to others. Use a waterproof cover
or wait until the conditions are dry before attempting to fly.
Manual Introductory Section, Page 8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info