29045
74
Zoom out
Zoom in
Previous page
1/78
Next page
Sailplane Section
Setting the Aileron 1 Travel
You now set the left-side travel for Aileron 1. Press the
B
key to activate left travel setting for Aileron 1 and set
the travel with the numeric keys E to M . The number
keys 0
through 100
input
the
value
directly. The +
and - keys increase or decrease the value by 1. The
+/- keys may be used to reverse the throw direction.
If you are not sure what you are changing, hold the
stick to one side and press different keys if there is no
effect, move the aileron stick to the other side and con-
tinue. Your setting may vary from 120 to +120%, with
an initial value of +100%.
Now set the right-side travel for Aileron 1. Press the
Q key to activate Aileron 1 right travel setting and set
the travel with the numeric keys as before.
Setting the Aileron 2 Travels
This procedure
is
repeated for Aileron 2.
Press the C
key to activate left travel setting for Aileron 2 and set the
travel with the numeric keys E to M as before.
Now set the right-side travel for Aileron 2. Press the
13 key to activate Aileron 2 right travel setting and set
the travel as before.
Setting the Flap Travels — 1 and 2
You now set the travel for Flap 2. Press the D key to
activate travel setting for Flap 2 and set the travel with
the numeric keys E to M. Your setting may vary from
-100 to +100%, with an initial value of +100%.
Now set the travel for Flap 1. Press the O key to
activate Flap 1 travel setting and set its travel with the
numeric keys. Its initial value is —100%.
Flap Trim Offset Setting
Flap trim offset sets the flap position from which
motion occurs. To input the flap trim offset amount
setting, move to the next screen by pressing the NXT R
key. Next, press the B key, then set the flap trim (left-
side lever, LS) to the position to be set and press the
F (SET) key.
Flap Trim Authority Setting
In the Flaperon mode, Flap Trim moves both ailerons
upwards or downwards together. To input the Flap Trim
Authority. Press the C key and set the rate with the
numeric keys F to M. You may choose any value from
0% to 100% for the Flap Trim Authority. The initial
setting is 30%, but a smaller number is recommended.
Sailplane Section, Page 150
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZAP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info