29045
62
Zoom out
Zoom in
Previous page
1/78
Next page
Sailplane Section
SPEED FLAP-AlLERON MIXING—4-S
This mixing is used to make the ailerons oper-
ate together as speed flaps. When the speed flaps
are deployed, the speed flaps and ailerons all
perform the speed flap operation simultaneously.
The mixing rates for up and down speed flap
movement can be set independently. You may also
set up a switch for switching this mixing on and
off during flight. If this mixing is activated with-
out defining an ON/OFF switch, mixing remains
on all the time.
Activation of Speed Flap-Aileron Mixing
In the Condition Menu, press the
SPF
key to get the
SPEED FLAP menu. Press the B key to get the SPF TO
AIL menu shown below.
Mode setting
Mixing
Rate
Setting
To On/Off Switch
Setting Menu
Return To Speed
Flap Mixing Menu
Mode Selection Keys
Use the A key to activate mode setting, then press
the
ACT
or INH keys ( F and G ) to activate or
inhibit speed flap coupling.
Setting the Down Speed Flap Mixing Rate
Press the C key, and then set the down aileron mix-
ing rate
with
the numeric
keys E to M
. The
initial
value
is +50% and the setting range may vary from -100 to
+100%.
ON/OFF Switch Setting
On initial setting, an activation switch for speed flap-
aileron mixing is not set, meaning that once activated, it
is on all the time. If you would like to set a switch to turn
it on and off, display the switch setting screen by pressing
the
SWT P
key, and use the keys to choose the switch
and ON direction you want. For a description of the
switch setting method, see page 37.
Up Speed Flap Mixing Rate Setting
Press the D key and set the up aileron mixing rate
with the numeric keys E to M . The setting range may
vary from -100 to +100% and the initial value is+50%.
Sailplane Section, Page 138
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZAP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info