29047

Futaba 9ZAP_part1 Manual

73
Zoom out
Zoom in
Previous page
1/78
Next page
Common Condition Section
DIGITAL TRIM
(TRM)
The Digital Trim function may be used to
program how the trims change as the force changes
on
the
trim
tab
switches. When
you
press
lightly
on the trim you get one speed of operation, and
when you increase the pressure, the repetition
speed and rate also increase. The repetition speed
and step rate and can be adjusted to match each
model, and the beeping sound that occurs when a
trim is operated can be turned on or off.
Any time you use the model select (MSL) func-
tion to choose another model, the new model
comes with its own trim data, and the previous
trim data are stored with the previous model.
When a model is retrieved, its trim positions are
also recalled.
There are two Trim modes available. The
Normal
mode is suitable for centering controls
such as the transmitter sticks, and trimming is
performed at the neutral position. The
ATL
mode
is usually used for throttle, where trimming is
performed only at the low end.
The trim functions on your PCM 1024Z have
two operational modes. The Separate mode trims
each flight condition separately, and has no effect
on the trim of other conditions. The Combination
mode should be used when you want to link the
trim
operation
between
modes. When
a
trim
posi-
tion is changed, it changes for ALL flight condi-
tions.
The Digital Trim function is also used to set the
delay for trim offsets when switching between
different flight conditions.
Using the Digital Trim Menu
Activation of command
In the Condition Menu, press the
TRM
key to get the
TRIM menu shown below.
Trim Memory
Position
Current Trim
Position
Stores Current Trims In Memory
Recalls Trim
Memory
Trim Setting Screen Call Buttons
Return To
Condition Menu
Trim Storage
To store the current trim positions in memory, press
the C->M K key and press the
YES
I key. This will
over write the previous positions. If you DO NOT wish to
memorize the trim positions, press the NO K key.
Recall Trim Memory
Trim setting
To set the trim switch parameters, call the trim to be
set with the trim keys
E to H .
This will bring up the
Trim setting screen as shown below.
Press the M->C L key, then the
YES I
key, to
recall the memorized trim position (this will wipe out
your current trim settings). If you do not wish to over-
write the trim state, press the NO J key.)
Common Conditions Section, Page 71
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZAP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info