Manual Futaba 9ZAP_part1 (page 69 of 78) (English)

29047

Zoom out

Zoom in

1/78

Common Condition Section

For the 7-Point Curve mixing method, each of the

points on the curve must be defined. To set the points,

first

select

the

point

with movement

keys Q and R

The

PT->

key increases the point number by one (moves one

to the right), and the <-PT reduces the point number by

one (moves one to the left). Once you have selected the

point on the curve you wish to set, input the rate with the

numeric setting keys E to M.

For the Rate Control Type of mixing, you need to

specify the control channel (this is not the master or slave

channel). Press the A key and select the desired channel

with the channel keys E to L . You will then need to

input the Mixing rate setting at the seven points. Press the

B key and select the point with the movement keys Q

and R. then input the rate with the numeric keys.

Rate control mixing has some interesting applications.

For example, in a sailplane model you might want to

adjust the rate of aileron-rudder coupling depending on

the amount of wing camber — the more camber, the

slower the model is flying, and the more rudder mixing is

needed. For this function, you could link the rudder

coupling mixer in the Special mix menu to a PMIX mixer,

with the rate control specified by the slider control that

controls the camber. Note that if you have differential set

up, you will not get equal coupling to either side, UN-

LESS you turn the master mix mode to UNMIX, so that

the differential is ignored for the mixing.

The PMIX menus on the PCM 1024Z are extremely

powerful, and we would recommend that you experiment

with all the different mixing types in the menus. Just set

up a receiver and some servos, and try different mixing

curves, types of mixing, offsets, linking, and all the other

parameters. This is a simple way to understand how the

mixing functions work, and after trying out a few of

them, you will discover that programming the mixers is

easier than trying to read these instructions!

Ending

Had

enough? Before you leave, try different stick

motions to be sure that the mixing functions that

you

have

defined behave as you expect them to. When you

are

satisfied, press the

END N

to return to Screen 2. If the

N key is pressed again, you will return to Screen 1 If N

pressed again, the display returns to the Condition

menu.

MIXING LINKING METHODS

Common Conditions Section, Page 67

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9ZAP_part1 Manual

Product: