29047
33
Zoom out
Zoom in
Previous page
1/78
Next page
System Section
CPM—COPY MODEL FUNCTION
This function is used to copy one set of model
data
into
a
second
memory
within
the
same trans-
mitter.
This
function
is
very
handy
because
it
may
be used for getting a head-start on setting up
models
with
almost
the
same settings
(only
differ-
ences need to be modified, instead of entering the
whole thing from scratch). Also, this function may
be used to make a backup copy of a model setup
before making changes.
The CPM function may be used to copy to and
from the optional CAMPac as well. The number of
models that may be stored in the CAMPac depends
on the number of flight conditions each contains.
This relationship is shown in detail on page 12.
Model Memory Menu
Source Model Name
Destination Model
Name
Return to System Menu
Model Memory Selection Keys
Usage of the Copy Model Function
(Note: source and destination may be both in transmitter, both in CAMPac, or
one in each)
Transmitter
1a Select the Source model with
the A to J ( 1 to 10 ) keys.
2a Select the Destination model
with the A to J (1 to 10 )
keys.
3. To copy all the flight conditions, press the ALL ( M ) key.
To copy just the default flight condition, press the DEF ( L ) key.
4.
If
you
are
satisfied
with
your
choices,
press
the
YES
(L)
key.
This
executes the copy function, which may take anywhere from 2 to 18
seconds. A beep indicates completion. Verify that the data were copied
under the destination model name.
If you wish to repeat the select on process, press the NO (
M
) key.
5. To continue copying, press the YES ( L ) key and repeat beginning at
step 1.
To end the process and return to the System Menu. press the END ( N )
key.
Optional CAMPac Memory Module
1b Press the NXT ( P ) key to get to
the CAMPac (model nos. 11 to 20 );
press the NXT (P ) key again to
get to models 21-26. Select the
desired Source model with the A to
J( 11 to20 or21 to26 ) keys.
2b Press the NXT (P ) key to get to
the CAMPac (model
nos. 11
to 20
);
press the NXT ( P ) key again to
get to models 21—26. Select the
desired Destination model with the
A to J (11 to 20 or 21to26)
keys.
System Section, Page 31
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZAP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info