Manual Futaba 9VAP (page 45 of 60) (English)

29043

Zoom out

Zoom in

1/60

PARAMETER

Servo Test: Each servo is operated in linear fash-

ion from neutral, to its maximum and minimum

positions. The operation is repeated sequentially

for Channels 1 through 8.

Mixing Mode: In the BASIC mode, all mixing

circuits except Programmable Mixing are de-

activated. In the AERO mode, all circuits are

useable.

PCM/PPM: PCM or PPM encoding can be select-

with

this

function.

PPM

encoding

allows

the

transmitter to be used with standard FM re-

ceivers.

D/R SW D/R: The ON/OFF directions of the

D/R Switches can be selected. In Mode 1, the

upper position is the D/R ON (low rate) position,

and in Mode 2, the lower position is the ON

position.

9CH SW POS: The position of the CH9 switch

can be selected. In SW POS 1, the CH9 Switch

becomes the RUD D/R switch position. For SW

POS 2, the CH9 Switch position is at the CH5

switch and CH5 is controlled by the CH7 Knob.

(Therefore, when AIL DIFF mixing is used, all 9

channels can be used effectively.)

2) Servo Test: Move the cursor to the SERVO-

to Line 2 with the cursor key, then dis-

play the PARAMETER screen by pressing the

program key.

TEST position with the

cursor or

NOTE: Encoding will not change until the

transmitter is turned OFF and back

ON again.

5) Dual Rate Switch Direction: Move the cursor

to the D/R SW DIR position and select Mode

or program

4) PCM/PPM: Move the cursor to the PCM/PPM

key. Turn the function ON and OFF with the

and program keys.

MODE position with the cursor or

key. Select either the BASIC or AERO mixing

mode by pressing the program or

key.

position with the cursor key and or

3) MIX-MODE: Move the cursor to the MIX-

key.

6) Channel 9 Switch Position: Move the cursor

to the 9CH SW POS position and select SW

POS

1 or 2 with the

program or

key.

7) Return to the EDIT screen by pressing the

program key.

select the desired encoding method by pres-

sing the

program key. or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9VAP in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9VAP Manual

Product: