29043

Futaba 9VAP Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
TYPE 1 Positive TYPE 2 Positive
With this type of curve, control response will be made
more sensitive near neutral and less sensitive as the stick
is deflected farther towards its extreme limits.
With this type of curve, response will be most sensitive
at the LOW end of control stick travel, and decrease as
the stick is moved toward HIGH.
TYPE 1 Negative
TYPE 2 Negative
With this type of curve, control response wilt be
"softer" around neutral and increase as the stick is
deflected farther.
With this curve, the response is less at the LOW end and
steadily increases as the stick is moved toward HIGH.
• When VTR is used, servo response remains linear, but the response is automatically switched to a higher
rate at a certain (adjustable) point in the control stick deflection.
• The initial response rate is the same as the Dual Rate ON rate (See page
18).
•
Maximum
servo
travel
limit
is
still controlled by
ATV
and/or
AFR.
Setting Methods
Exponential
1) Select the EDIT screen and move the cursor
to Line 2 with the cursor key. or
the "rate" position and pressing the
or
program key. When the program
cursor key, then select the operation
Select the EXPONENTIAL/VTR program
screen by pressing the program key.
2) Select the channel to be set with the or
mode with the program , or
key. VTR is available only on CH1, CH2, and
CH4.
3) When the EXP mode is selected, the type of
curve can be selected by moving the cursor
to the "typ" position with the
or
cursor key and pressing the or
pro-
gram key. (The type of curve is not selected
in the VTR mode.)
4) When the EXP or VTR mode is selected, the
servo response curve is displayed on a graph
at the right side of the screen. The amount of
Expo can be changed by moving the cursor to
key is pressed, the rate is preset to 0% (0% =
normal or linear).
5) In the VTR mode, the "rate" adjustment is
used to adjust the stick position at which the
servo response changes from Low to High.
The initial (Low) rate is adjusted by the D/R
adjustment program (See page 18).
6) Channels 5 through 8 can be displayed and set
by pressing the program key.
In the above example, a TYPE 2 Negative Ex-
ponential Curve is shown. This type is often
helpful on the Throttle channel. Depending on
the carburetor design and linkage, actual power
transition can be made more linear in relation to
stick movement. (About -20% is a good initial
setting for fixed-wing aircraft).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9VAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9VAP in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info