29041
29
Zoom out
Zoom in
Previous page
1/109
Next page
MODEL TYPE: sets the type of programming used for this model.
The 9C super has 12 model memories, which can each support:
one powered aircraft (ACRO) memory type (with multiple wing and tail configurations. See twin aileron servos, twin
elevator servos, ELEVON, and V-TAIL for further information.);
two glider wing types (again with multiple tail configurations). See Glider MODEL TYPE for details, p. 70;
six helicopter swashplate types, including CCPM. See Helicopter MODEL TYPE for details, p. 82.
Before doing anything else to set up your aircraft, first you must decide which MODEL TYPE best fits this particular aircraft.
(Each model memory may be set to a different model type.) If your transmitter is a 9CA super, the default is ACRO. If it is
a 9CH super, the default is HELI(SW1).
ACRO is the best choice for most powered airplanes, but in some circumstances, GLID2FLAP may be a better choice. ACRO
is usually a better choice because of functions it offers that the GLID types do not:
ACRO adds:
SNAP-ROLL
AILEVATOR (twin elevator servo support)
For fuel-powered airplanes: IDLE-DOWN, THR-CUT, THROTTLE-NEEDLE mixing and THROTTLE DELAY programming.
But ACRO lacks:
START and SPEED OFFSETS
4 seperate conditions for optional setups (GLID2FL-C)
If you are using a glider or heli
MODELTYPE
, please go to that chapter now to select the proper model type and support
your model setup. Note that changing
MODEL TYPE
resets all data for the model memory, including its name.
GOAL of EXAMPLE: STEPS: INPUTS:
29
Select the proper MODEL TYPE for your
model. Ex: ACRO.
[NOTE: This is one of several functions
that requires confirmation to make a
change. Only critical changes require
additional keystrokes to accept
the change.]
Open the BASIC menu, then open the
PARAMETER submenu.
Go to MODEL TYPE.
Select proper MODEL TYPE.
Ex: ACRO.
Confirm the change. Close PARAMETER.
Turn on the transmitter.
for 1 second.
(If ADVANCE, again.)
then to highlight PARAMETER.
to choose PARAMETER.
to TYPE.
to ACROBATIC. for 1 second.
sure? displays. to confirm.
to return to BASIC menu.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9CHPsuper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CHPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info