29007
82
Zoom out
Zoom in
Previous page
1/109
Next page
HELI-SPECIFIC BASIC MENU FUNCTIONS
MODEL TYPE: This function of the PARAMETER submenu is used to select the type of model programming to be used.
Before doing anything else to set up your model, first you must decide which MODEL TYPE best fits your aircraft. If
your transmitter is a 9CA super, the default is ACRO. If it is a 9CH super, the default is HELI(SW1).
HELICOPTER SWASHPLATE TYPES:
The 9C super radios support 6 basic swashplate setups, including "single servo" (SW1-most helicopters use this type) and
5 types of CCPM (cyclic and collective pitch mixing). A "single servo" swashplate uses one servo for each axis: aileron,
elevator (cyclic pitch), and collective pitch. CCPM helicopters utilize a combination of servos working together to achieve
the 3 axes of motion. There are 5 basic CCPM types, displayed below. CCPM has several advantages, the most obvious
of which is far less mechanical complexity to properly move the swashplate of the helicopter. Additionally, several servos
working in unison (ex: SR3, all 3 servos together create elevator movement) dramatically increases the torque available as
well as the precision and centering.
Please note that some helicopters are type SR-3 or SN-3, except off by 180 degrees. For example, the Kyosho
®
Caliber
is
SR-3 but with the 2 parallel servos to the rear of the helicopter, not front. If your model's swashplate is off by 180 degrees,
you will still use that swashplate type, but also use SWASH AFR (p.84)to adjust the functions as needed until it operates
properly. Additionally, different angles of CCPM may also be created utilizing the fully assignable programmable mixes.
(See our Frequently Asked Questions area at www.futaba-rc.com\faq\faq-9c.html for specific examples.)
Not operating quite like you expected? In many CCPM installations you need to either reverse the direction of a specific
function (SWASH AFR) or reverse a single servoís direction (REVERSE). See SWASH AFR for details. (p.84)
Swashplate Types
HELISWH1 Type: Independent aileron, pitch and elevator servos linked to the
swashplate. Most kits are HELISWH1 type.
HELI SWH2 Type: pushrods positioned as shown. Elevator operates with a mechanical
linkage. With Aileron inputs, the aileron and pitch servos tilt the swashplate left and
right; with Pitch inputs, the aileron and pitch servos raise the swashplate up and down.
HELI SWH4 Type: pushrods positioned as shown. With Aileron inputs, the aileron and
pitch servos tilt the swashplate left and right; with Elevator inputs, the servos tilt the
swashplate fore and aft; with Pitch inputs, all four servos raise the swashplate up and down.
HELI SR-3 Type: pushrods positioned as shown. With Aileron inputs, the aileron and
pitch servos tilt the swashplate left and right; with Elevator inputs, the three servos tilt
the swashplate fore and aft; with Pitch inputs, all three servos raise the swashplate up
and down.
HELI SN-3 Type: pushrods positioned as shown. With Aileron inputs, the three servos
tilt the swashplate left and right; with Elevator inputs, the elevator and pitch servos tilt
the swashplate fore and aft; with Pitch inputs, all three servos raise the swashplate up
and down.
Pitch Aileron
Front
Aileron Pitch
Front
(Pitch)
(Aileron)
Elevator 1
Elevator 2
(CH8)
Aileron
(Pitch)
Pitch
(Aileron)
Front
Elevator
120
120120
Aileron
Pitch
Front
Elevator
120
120
120
82
Aileron
(Pitch)
Pitch
1:1
(Aileron)
Front
Elev
ator
HELI SR-3s Type: pushrods positioned as shown. Fundamentally, the servo operations
of SR-3s type are almost same as SR-3 type.
However, the servo arrangement about elevator operation differs.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9CAPsuper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CAPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info