29007

Futaba 9CAPsuper Manual

25
Zoom out
Zoom in
Previous page
1/109
Next page
25
A LOOK AT THE RADIO'S FUNCTIONS STEP BY STEP
MODEL submenu: includes three functions that manage model memory: MODEL SELECT, MODEL COPY and MODEL NAME.
Since these functions are all related, and are all basic features used with most models, they are together in the MODEL
submenu of the BASIC menu.
MODEL SELECT: This function selects which of the 12 model memories in the transmitter
(or 6 in the optional CAMPac) to set up or fly. For clarity the model's name and an image
of its type are indicated after its number. (Each model memory may be of a different
model type from the other memories.)
Note: If you are using the optional CAMPac, your choices in MODEL SELECT and MODEL
COPY will include 13-18, which are the model memories in the CAMPac. You do not
have to COPY from the CAMPac to the transmitter prior to working with that model
memory.
T9C CAMPac data
Although a CAMPac data which saved the data of a conventional T9C transmitter cannot be used calling directly, it is
possible to use it by the following method, copying to the model memories of a T9C super transmitter. When using the
CAMPac, it will be displayed, for example as "13->01 (T9C)." Press D
IAL for 1 second in this state and the check display
of "sure?" will appear. Press D
IAL again, the data of CAMPac (13) will be copied to model number"01" of the T9C super
transmitter. As for the data of a function added by T9C super, an initial value is set up at this time. Please do not forget the
check of setting data before a flight.
In addition, refer to p.15 for the conversion method from T9C to T9C super of the CAMPac data itself.
NOTE: When you choose a new model in the MODEL SELECT function, if the
new model is set to the other modulation, you must cycle the transmitter
power to change modulations. If you do not cycle the power, the modulation
type will flash on the home screen to remind you. You are still transmitting
on the other modulation until you affect this change.
GOAL: STEPS: INPUTS:
Select Model #3.
NOTE: This is one of several functions
for which the radio requires confirma-
tion to make a change.
Open BASIC menu, then open
MODEL submenu.
Choose Model #3.
Confirm your change.
Close.
for 1 second.
(If ADVANCE, again.)
to 3.
for 1 second.
Confirm proper modulation of new
model memory.
Where next?
If PPM or PCM are flashing in the upper right hand corner, then the new model is
set for the other receiver type. Turn the transmitter off/on to change the modula-
tion.
NAME the model: see p. 27.
Change MODEL TYPE (aircraft, heli, glider): see p. 29.
Change modulation [FM (PPM) or PCM]: see p. 30.
Utilize servo REVERSE: see p. 31.
Adjust END POINTs: see p. 32.
Set up IDLE-DOWN and THR-CUT for throttle management: see p. 33.
Model type
• ACRO (aircraft)
• GLID (glider)
• HELI (helicopter)
FLASHING
if required to MODEL.
sure? displays.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9CAPsuper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CAPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info