29007

Futaba 9CAPsuper Manual

9
Zoom out
Zoom in
Previous page
1/109
Next page
9
CONTENTS AND TECHNICAL SPECIFICATIONS
(Specifications and ratings are subject to change without notice.)
Your 9CAP super or 9CHP super (packaged with a 8 or 9-channel PCM receiver), 9CAF super or 9CHF super
(packaged with an 8-channel FM receiver) system includes the following components:
• 9C super Transmitter, including RF module (TP)
• R138DF, R148DF, R138DP, or R149DP Receiver
• Servos, S3151, S9252, S3001 or S9001, with mounting
hardware and servo arm assortment
• Switch harness
• Aileron extension cord
• 110V wall charger (North America)
• Frequency Flag
*
The set contents depend on the type of set.
*
Transmitter band may only be changed by changing the module. Contact Futaba Service
Center regarding adjustability of receiver band. Band cannot be changed by simply changing
crystals.
Transmitter T9C super
Operating system: 2-stick, 9 channels, PCM1024 system
Transmitting frequency: 29, 35, 36, 40, 41, 50, 72 or 75
MHz bands
Modulation: FM/PPM or PCM, switchable
Power supply: 9.6V NT8S700B Ni-Cd battery
Current drain: 280 mA
Receiver R149DP
(PCM Dual conversion)
Receiving frequency: 29, 35, 36, 40, 41, 50, or 72 MHz bands
Intermediate freq.: 10.7 MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1.28 x 2.17 x 0.82 in. (32.6 x 55.0 x 20.8 mm)
Weight: 1.22 oz. (34.5 g)
Channels: 9
Receiver R138DP
(PCM Dual conversion)
Receiving frequency: 75 MHz bands
Intermediate freq.: 10.7 MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 27 mA
Size: 2.56 x 1.42 x 0.85 in. (65 x 36 x 21.5 mm)
Weight: 1.42 oz. (40.3 g)
Channels: 8
Receiver R148DF
(FM Dual conversion)
Receiving frequency: 50 or 72 MHz bands
Intermediate freq.: 10.7MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1.0 x 2.2 x 0.9 in. (25.4 x 55.8 x 22.9 mm)
Weight: 1.1 oz. (31.2 g)
Channels: 8
Receiver R138DF
(FM Dual conversion)
Receiving frequency: 35 or 40 MHz bands
Intermediate freq.: 10.7MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 20 mA
Size: 2.56 x 1.42 x 0.85 in. (65 x 36 x 21.5 mm)
Weight: 1.42 oz. (40.3 g)
Channels: 8
Servo S9252 (Digital servo)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 V (from receiver)
Output torque: 91.7 oz.-in. (6.6 kg-cm) at 4.8V
Operating speed: 0.14 sec/60 at 4.8V
Size: 1.57 x 0.79 x 1.44 in. (40 x 20 x 36.6 mm)
Weight: 1.76 oz. (50 g)
Servo S3151 (Standard, Digital servo)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 V (from receiver)
Output torque: 43.1 oz.-in. (3.1 kg-cm) at 4.8V
Operating speed: 0.21 sec/60 at 4.8V
Size: 1.59 x 0.79 x 1.42 in. (40.5 x 20 x 36.1 mm)
Weight: 1.48 oz. (42 g)
Servo S9001 (Coreless motor)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 54.2 oz.-in. (3.9 kg-cm) at 4.8V
Operating speed: 0.22 sec/60 at 4.8V
Size: 1.59 x 0.78 x 1.41 in. (40.4 x 19.8 x 36 mm)
Weight: 1.69 oz. (48 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 41.7 oz.-in. (3.0 kg-cm)
Operating speed: 0.22 sec/60
Size: 1.59 x 0.78 x 1.41 in. (40.4 x 19.8 x 36 mm)
Weight: 1.59 oz. (45.1g)
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9CAPsuper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CAPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info