29003
19
Zoom out
Zoom in
Previous page
1/101
Next page
16
An alarm or error indication may appear on the display of your transmitter for several reasons,
including when the transmitter power switch is turned on, when the battery voltage is low, and
several others. Each display has a unique sound associated with it, as described below.
Warning sound: Beep beep beep beep
(repeated)
The BACKUP ERROR warning occurs when the
transmitter memory is lost for any reason. If this occurs,
all of the data will be reset when the power is turned on
again.
DO NOT FLY when this message is displayed
all programming has been erased and is not available.
Return your transmitter to Futaba for service.
Warning sound: Beep beep beep beep beep
(repeated 3 times)
The MODEL SELECTION warning is displayed
when the transmitter attempts to load a model memory
from a memory module that is not currently plugged
into the transmitter. When this occurs, model No. 01 is
automatically loaded.
Do not fly until the proper model is loaded into
memory! Reinsert the memory module, and recall the
desired setup using the model select function.
Warning sound: Beep beep beep —
(beeping does not stop until transmitter is
turned off)
The LOW BATTERY warning is displayed when the
transmitter battery voltage drops below 8.5V.
LAND YOUR MODEL AS SOON AS POSSIBLE
BEFORE LOSS OF CONTROL DUE TO A DEAD
BATTERY.
Warning sound: beep beep beep beep beep
space (repeated)
The MIXER ALERT warning is displayed to alert
you whenever you turn on the transmitter with any of
the mixing switches active. This warning will
disappear when the offending switch or control is
deactivated. Switches for which warnings will be
issued at power-up are listed below:
HELI: Throttle cut, inverted, throttle hold, idle-up
ACRO: Throttle cut, idle-down, snap roll, airbrake
GLID: Butterfly, throttle cut, idle-down
(Operation when switch OFF does not stop the mixing warning)
When the warning does not stop even when the mixing switch indicated by the warning
display on the screen is turned off, the functions described above probably use the same
switch and the OFF direction setting is reversed. In short, one of the mixings described above
is not in the OFF state.
In this case, reset the warning display by pressing (+)/(-) keys simultaneously. Then change
one of the switch settings of the mixings duplicated at one switch.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8UHPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UHPS in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info