482734
39
Zoom out
Zoom in
Previous page
1/93
Next page
38
Throttle cut (
THR-CUT
): provides an easy way to stop the engine by flipping a switch (with THROTTLE STICK at

HELI
, there is an
additional setting,
THR-HOLD
. See p. 78.
Throttle cut in the case of ESC use (
THR-CUT
): Sudden rotation may be carried out when releasing it using
THR-CHT
in

releases.

NULL
to avoid
accidentally assigning it to a switch, which might result in an unintentional dead

IDLE-DOWN
and
THR-CUT
on p. 37.
MODE
is changed
ESC
from
NOR
.
GOAL of EXAMPLE: STEPS: INPUTS:
Decrease the throttle setting (at idle) to

(Note that you MUST assign a switch.
The default is
NULL
. We recommend
SWITCH C in the down position, with
IDLE-DOWN
programmed to SWITCH C
in the center and down positions.)
Open
THR-CUT
function.
for 1 second.
to
THR-CUT
.
Activate the function. Choose desired
switch, and the position which activates
the function.
to
MIX
. to
OFF
.
to
SW
. to
SwC
.
to
POSI
. to
DOWN
.
With THROTTLE STICK at idle, adjust
the rate until the engine consistently

binding.*
SwC to down position.
THROTTLE STICK.
to
RATE
. until shuts off.
Close.
Where next? Set up dual/triple rates and exponential (
D/R
,
EXP
): see p. 39.
Set up
TRAINER
functions: see p. 44.
Set up twin aileron servos: see p. 52.
Set up twin elevator servos: see p. 54.


GOAL of EXAMPLE: STEPS: INPUTS:
MODE
is changed
ESC
from
NOR
.

Open
THR-CUT
function.
for 1 second.
to
THR-CUT
.
MODE
is changed
ESC
from
NOR
.
to
MODE
. to
ESC
.

to
THR
.
THROTTLE STICK.
for 1 second.
Close.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8J in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info