28995
71
Zoom out
Zoom in
Previous page
1/82
Next page
HOVERING ADJUSTMENTS (HOV-THR and HOV-PIT):
Hovering throttle and hovering pitch are fine-tuning adjustments for the throttle and collective pitch curves individually,
af
Note: HOV-THR is active in normal with and option for normal and idle up 1. HOV-PIT is only active in normal
condition.
fecting performance only around the center point. They allow in-flight tweaking of the curves for ideal setup.
Adjustability:
Rotor speed changes caused by temp., humidity
HOV-THR and HOV-PIT can assign the knob VR only to one of these functions at a time. Each time, assign the knob
,altitude or other changes in flying conditions are easily accommodated.
Both adjustments may be inhibited if not desired.
in these functions. Temporarily turning off the knob but maintaining the last memorized setting.
Adjustments may be memorized and then the knobs returned to center point to use that amount of adjustment. Allows
easy use of the trimming knobs for multiple models. (Note that when memorization is repeated with the knob offset
from center, the trim value accumulates.)
Adjustments are quickly reset to the initial value by turning the dial until the trim reads 0%, memorizing, then
returning the knob to its center position.
Note that all functions, including these, assume the model hovers at half stick.
Available in normal condition only.
GOAL of EXAMPLE: STEPS: INPUTS:
71
Fine-tune hovering with the hovering
adjustments. Remember these affect
only the hovering (normal) condition.
Adjust throttle and collective pitch
curves until model hovers nicely. In
flight, adjust collective pitch and
throttle curves near hover point
independently with HOV-THR and HOV-
PIT knobs.
Store new settings after flight.
Where next?
Open the HOV-THR function.
Assign the dial VR.
Store the current dial settings prior to
selecting another model.
Close.
Open the HOV-PIT function.
Store the current dial settings prior to
Change VR to OFF.
setting HOV-THR function.
Close.
for 1 second.
(If basic, again.)
to HOV-THR.
to ON.
for one second to store.
or VR to center.
to HOV-PIT.
for one second to store.
or VR to center.
to OFF.
THR-HOLD: see p. 67.
Setting up the Idle-Ups: Throttle and Collective pitch Curves and Revo. Mixing
(TH-CURVE, PIT-CURVE, REVO. MIXING for idle-ups: see p. 69.
D/R,EXP: see p. 34.
In flight, adjust throttle curve near hover point with the knob.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 7CHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 7CHP in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 7CHP

Futaba 7CHP User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info