28995
48
Zoom out
Zoom in
Previous page
1/82
Next page
MIXES: the backbone of nearly every function
Mixes are special programs within the radio that command one or more channels to act together with input from only one
source, such as a stick, switch or knob.
There are a variety of types of mixes.
Types:
Linear: Most mixes are linear. A 100% linear mix tells the slave servo to do exactly what the master servo is doing,
using 100% of the slave channel's range to do so. An example is FLAPERON. When aileron stick is moved, the flap
servo is told to move exactly the same amount. A 50% linear mix would tell the slave servo, for example, to move to
50% of its range when the master's control is moved 100%.
Offset:AnOFFSET mix is a special type of linear mix. When the mix is turned on (usually a flip of a switch), the slave
servo is moved a set percent of its range. An example of this is AIRBRAKE --- moving flaps, flaperons, and elevator all
to a set position at the flip of a switch. (see p. 52.)
Essentially every feature in the radio's programming is really a mix, with all assignments/programming set up and ready
to use. Additionally, the7C ACRO and HELI programs provide 3 linear fully-programmable mixes that allow you to
set up special mixes to resolve flight difficulties, activate additional functions, etc.
Let's look quickly at a few examples that are features we've already covered. This may help to clarify the mix types and
the importance of mixes.
Additional examples:
Exponential is a preprogrammed curve mix that makes the servosí response more (+) or less (-) sensitive around center
stick (works in conjunction with dual rate, a linear mix that adjusts the total range). see D/R,EXP,p.34.
THR-CUT is an OFFSET pre-programmed mix. This tells the throttle servo, when below a certain point, to move toward
idle an additional set percentage to help close the carburetor. See p. 33.
ELEV-TO-FLAP mixing is a pre-programmed linear mix to move the flaps proportionally to elevator control, helping the
model loop even tighter than it can on elevator alone. (see p. 49.)
Next, we'll get an in-depth look at some pre-programmed mixes (mixes whose channels are predefined by Futaba for
simplicity) we've not covered yet, and last, look at the fully-programmable mix types.
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 7CHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 7CHP in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 7CHP

Futaba 7CHP User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info